OEM 2001 Chevrolet Cavalier Shock Absorber

2001 Chevrolet Cavalier Parts Questions & Experts Answers

• Q: How to Replace a Shock Absorber on 2001 Chevrolet Cavalier?

  A: Beginning the Shock Absorber replacement requires first moving the rear compartment carpet for upper mounting nut accessibility and then unfastening the nut. Place the vehicle on a hoist to gain access at which point the tire and wheel should be removed. You need to position a jackstand under the rear axle to keep the tension on the Shock Absorber before removing the Shock Absorber upper mounting bolts. Continue with Shock Absorber replacement by attaining bolt access through lowering the jackstand until the Shock Absorber tension decreases. The Shock Absorber lower mounting bolt follows before removing the Shock Absorber from the vehicle. Begin installation of the Shock Absorber into the vehicle while strictly following the fastener notice included in service precautions. When installing the Shock Absorber lower mounting bolt you must apply torque of 70 nm (51 ft. Lbs.). A jackstand should elevate the rear end so you can mount the upper Shock Absorber bolts which require a torque of 25 nm (18 ft. Lbs.). Lower the vehicle and install the Shock Absorber upper mounting nut which should be tightened to 25 nm (18 ft lbs). Reinstall the tire after finishing by putting back the rear compartment carpet.