How to replace the rear control arm bushing on 2002 Chevrolet Cavalier?

The vehicle elevation procedure begins by supporting the vehicle with tools followed by tire and wheel removal. First disconnect brake hoses from the axle then remove the wheel speed sensor harness from its retainers attached to the axle. Start by taking out the bolts, washers, and nuts from the Control Arm followed by flipping the Control Arm downward to reach the bushings. The rear Control Arm bushing adapter (J29376-95) should be installed onto the rear Control Arm before you attach the coupling from the rear Control Arm bushing service set (J29376-A). Start by putting together the bushing extraction tools comprising the inch nut (J21474-19), the remover from the rear Control Arm bushing service set (J29376-A), the Pressure Plate from the rear Control Arm bushing service set (J29376-A) and the inch bolt (J21474-18). Use the inch nut (J21474-19) to twist until the bushing exits the Control Arm before disassembling the bushing removal tools. Begin by greasing the new bushing's outside case before putting it into position then use the inch nut (J21474-19) along with Pressure Plate and installer tools from the rear Control Arm bushing service set (J29376-A) and inch bolt (J21474-18) to perform the installation. Apply force through the inch nut (J21474-19) until the bushing has fully inserted into the Control Arm then remove the bushing installation tools. Begin by reattaching the bolts and nuts and washers to their original positions then tighten the nuts by hand before reconnecting the wheel speed sensor harness and brake hoses to the rear axle. Install the tire-wheel assembly then lower the vehicle before torquing Control Arm nuts to 120 nm (52 ft. Lbs.).

OEM 2002 Chevrolet Cavalier Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Control Arm Bushings found

View related parts
2002 Chevrolet Cavalier Axle Bushing, Yellow, Rear
Part Number: 22597998
$29.58 MSRP: $36.25
You Save: $6.67 (19%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Axle Pivot Bushing; Axle Beam Mount; Axle Beam Bushing; Axle Assembly Bushing; Axle Arm Bushing; Bushing; Bushings
- Position: Rear
- Replaces: 10150337
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.4 x 3.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22597998
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- Base, CL, CS, LS, LS Sport, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
2002 Chevrolet Cavalier Axle Bushing, Green, Rear
Part Number: 10150338
$17.48 MSRP: $35.74
You Save: $18.26 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Crossmember Bushing; Axle Pivot Bushing; Axle Beam Mount; Axle Beam Bushing; Bushing
- Position: Rear
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.3 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10150338
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Chevrolet Cavalier Lower Control Arm Bushing, Front
Part Number: 22610297
$3.05 MSRP: $4.83
You Save: $1.78 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Lower Control Arm Rear Bushing; Bushings
- Position: Front Lower
- Replaced by: 22710854
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.5 x 3.2 x 2.6 inches
- Condition: New
- SKU: 22610297
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Chevrolet Cavalier Lower Control Arm Bushing, Front
Part Number: 22645684
$18.81 MSRP: $37.76
You Save: $18.95 (51%)
ADD TO CART
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.1 x 2.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22645684
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Chevrolet Cavalier Lower Control Arm Bushing, Front
Part Number: 22645683
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.4 x 1.8 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22645683
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Chevrolet Cavalier Lower Control Arm Bushing
Part Number: 22613956
Product Specifications
- Other Name: Bushing, Steering Knuckle Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Bushings
- Position: Lower
- Item Weight: 1.20 Pounds
- Item Dimensions: 2.8 x 2.9 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22613956
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS

2002 Chevrolet Cavalier Control Arm Bushing

With a comprehensive array of OEM 2002 Chevrolet Cavalier Control Arm Bushing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Cavalier Control Arm Bushing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Cavalier Parts Questions & Experts Answers

Q: How to replace the rear control arm bushing on 2002 Chevrolet Cavalier?
A: The vehicle elevation procedure begins by supporting the vehicle with tools followed by tire and wheel removal. First disconnect brake hoses from the axle then remove the wheel speed sensor harness from its retainers attached to the axle. Start by taking out the bolts, washers, and nuts from the Control Arm followed by flipping the Control Arm downward to reach the bushings. The rear Control Arm bushing adapter (J29376-95) should be installed onto the rear Control Arm before you attach the coupling from the rear Control Arm bushing service set (J29376-A). Start by putting together the bushing extraction tools comprising the inch nut (J21474-19), the remover from the rear Control Arm bushing service set (J29376-A), the Pressure Plate from the rear Control Arm bushing service set (J29376-A) and the inch bolt (J21474-18). Use the inch nut (J21474-19) to twist until the bushing exits the Control Arm before disassembling the bushing removal tools. Begin by greasing the new bushing's outside case before putting it into position then use the inch nut (J21474-19) along with Pressure Plate and installer tools from the rear Control Arm bushing service set (J29376-A) and inch bolt (J21474-18) to perform the installation. Apply force through the inch nut (J21474-19) until the bushing has fully inserted into the Control Arm then remove the bushing installation tools. Begin by reattaching the bolts and nuts and washers to their original positions then tighten the nuts by hand before reconnecting the wheel speed sensor harness and brake hoses to the rear axle. Install the tire-wheel assembly then lower the vehicle before torquing Control Arm nuts to 120 nm (52 ft. Lbs.).