Make sure this part fits

GM 22645684
Lower Control Arm Bushing, Front

1995-2005 GM

Customer Questions & Expert Answers (11)
GM 22645684 Lower Control Arm Bushing, Front
  • Part Description
    Bushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing
  • Position
    Front Lower
  • Manufacturer
    General Motors
Make sure this part fits
$18.81 MSRP: $37.76
You Save: $18.95 (51%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2005 Chevrolet CavalierBase, LS, LS Sport, RS, Z244 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    1997-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1999-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1997 Oldsmobile Cutlass SupremeBase6 Cyl 3.1 L GAS
    1999-2005 Pontiac Grand AmGT, GT1, SE, SE1, SE24 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1995-2003 Pontiac SunfireGT, SE4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22645684 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22645684 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after disconnecting the brake hoses and wheel speed sensor harness for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    Remove the bolts, washers, and nuts from the control arm, and rotate the control arm downward to access the bushings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    How is the new bushing seated in the control arm for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Tighten the Inch Bolt (J21474-19) until the bushing is completely seated in the control arm, then disassemble the installation tools.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What tools are needed for the bushing installation for the 2004 Chevrolet Cavalier? Posted by Customer
    A:
    The 3/8 Inch Bolt (J 21474-19), the pressure plate from the Rear Control Arm Bushing Service Set (J 29376-A), the installer from the Rear Control Arm Bushing Service Set (J 29376-A), and the 3/8 Inch Nut (J 21474-18).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What is the first step in the installation process for the 2003 Chevrolet Cavalier? Posted by Customer
    A:
    Insert the rear bushing into the control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    How should the front bushing be prepared for installation for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Lubricate the outer casing of the front bushing and insert it into the control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What tools are needed for the installation of the rear bushing for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Assemble the bushing installation tools with J 21474-27, the receiver/installer from Front Control Arm Bushing Set (J 41211), the receiver from Front Control Arm Bushing Set (J 41211), and Nut (J 21474-4).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What should be disconnected after removing the tire and wheel assemblies for the 2000 Chevrolet Cavalier? Posted by Customer
    A:
    Disconnect the brake hoses from the axle and remove the wheel speed sensor harness from the retainers on the axle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    How do you remove the front bushing for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Tighten the bushing removal tool (J 21474-18) until the front bushing is removed from the control arm, then disassemble the tools.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    How do you ensure the rear bushing is fully seated in the control arm for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Tighten the J 21474-4 until the rear bushing is fully seated in the control arm, then disassemble the tools.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What tools are needed for bushing installation for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    The tools include the bushing installation tool (J21474-27), the receiver/installer from the Front Control Arm Bushing Kit (J41211), the receiver from the Front Control Arm Bushing Kit (J41211), and the Nut (J21474-4).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Control Arm Bushing, Front 22645684 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22645684 Lower Control Arm Bushing, Front is available in the market under the name GM Control Arm Bushing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22645684 Lower Control Arm Bushing, Front fits certain Chevrolet Malibu, Classic, Cavalier models, as well as Pontiac Grand Am, Sunfire. Additionally, it is compatible with Oldsmobile Cutlass, Alero, Cutlass Supreme models.
The original GM component designated by manufacturer part number 22645684 maintains top performance when functioning as the Bushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing unit at its Front Lower. The component 22645684 is constructed from durable material and its dimensions span 3.1 x 2.5 x 2.2 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm. The part 22645684 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.