How to service and repair the rear control arm bushing on 2000 Chevrolet Cavalier?

Before starting rear Control Arm bushing repairs, raise and support the vehicle then remove tire components and wheel assemblies. First detach brake hoses from the axle and second remove wheel speed sensor harness from its retainers on the axle. Begin by removing the Control Arm's bolts, washers, and nuts before rotating the Control Arm downward to reach the bushings. Begin with installation of the rear Control Arm bushing adapter (J 29376-95) onto the rear Control Arm before attaching the coupling supplied with the rear Control Arm bushing service set (J 29376-A). Complete the bushing removal tool setup by adding together the 3/8 inch bolt (J 21474-19), remover from the rear Control Arm bushing service set (J 29376-A), pressure plate from the rear Control Arm bushing service set (J 29376-A), and the 3/8 inch nut (J 21474-18). Use the 3/8 inch bolt (J 21474-19) to secure the Pressure Plate before the bushing leaves the Control Arm. Then remove all tools from the installation. To install the new bushing use the 3/8 inch bolt (J 21474-19) along with the Pressure Plate from the rear Control Arm bushing service set (J 29376-A), the installer from the rear Control Arm bushing service set (J 29376-A), and the 3/8 inch nut (J 21474-18). Use the 3/8 inch bolt (J 21474-19) to tighten it down until the bushing slides completely into the Control Arm before disassembling the installation tools. First install the bolts and washers and nuts before you manual-tighten the nuts and restore the wheel speed sensor harness on the rear axle. Reinstall brake hoses to the rear axle while adding tires and wheels and finally lower the vehicle. The final step involves tightening Control Arm nuts to a torque of 120 nm (52 ft. Lbs.).

OEM 2000 Chevrolet Cavalier Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Control Arm Bushings found

View related parts
2000 Chevrolet Cavalier Axle Bushing, Yellow, Rear
Part Number: 22597998
$29.58 MSRP: $36.25
You Save: $6.67 (19%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Axle Pivot Bushing; Axle Beam Mount; Axle Beam Bushing; Axle Assembly Bushing; Axle Arm Bushing; Bushing; Bushings
- Position: Rear
- Replaces: 10150337
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.4 x 3.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22597998
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Base, CL, CS, LS, LS Sport, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
2000 Chevrolet Cavalier Axle Bushing, Green, Rear
Part Number: 10150338
$17.48 MSRP: $35.74
You Save: $18.26 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Crossmember Bushing; Axle Pivot Bushing; Axle Beam Mount; Axle Beam Bushing; Bushing
- Position: Rear
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.3 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10150338
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Chevrolet Cavalier Lower Control Arm Bushing, Front
Part Number: 22610297
$3.05 MSRP: $4.83
You Save: $1.78 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Lower Control Arm Rear Bushing; Bushings
- Position: Front Lower
- Replaced by: 22710854
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.5 x 3.2 x 2.6 inches
- Condition: New
- SKU: 22610297
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Chevrolet Cavalier Lower Control Arm Bushing, Front
Part Number: 22645684
$18.81 MSRP: $37.76
You Save: $18.95 (51%)
ADD TO CART
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.1 x 2.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22645684
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Chevrolet Cavalier Lower Control Arm Bushing, Front
Part Number: 22645683
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.4 x 1.8 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22645683
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Chevrolet Cavalier Lower Control Arm Bushing
Part Number: 22613956
Product Specifications
- Other Name: Bushing, Steering Knuckle Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Bushings
- Position: Lower
- Item Weight: 1.20 Pounds
- Item Dimensions: 2.8 x 2.9 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22613956
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS

2000 Chevrolet Cavalier Control Arm Bushing

With a comprehensive array of OEM 2000 Chevrolet Cavalier Control Arm Bushing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Cavalier Control Arm Bushing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Cavalier Parts Questions & Experts Answers

Q: How to service and repair the rear control arm bushing on 2000 Chevrolet Cavalier?
A: Before starting rear Control Arm bushing repairs, raise and support the vehicle then remove tire components and wheel assemblies. First detach brake hoses from the axle and second remove wheel speed sensor harness from its retainers on the axle. Begin by removing the Control Arm's bolts, washers, and nuts before rotating the Control Arm downward to reach the bushings. Begin with installation of the rear Control Arm bushing adapter (J 29376-95) onto the rear Control Arm before attaching the coupling supplied with the rear Control Arm bushing service set (J 29376-A). Complete the bushing removal tool setup by adding together the 3/8 inch bolt (J 21474-19), remover from the rear Control Arm bushing service set (J 29376-A), pressure plate from the rear Control Arm bushing service set (J 29376-A), and the 3/8 inch nut (J 21474-18). Use the 3/8 inch bolt (J 21474-19) to secure the Pressure Plate before the bushing leaves the Control Arm. Then remove all tools from the installation. To install the new bushing use the 3/8 inch bolt (J 21474-19) along with the Pressure Plate from the rear Control Arm bushing service set (J 29376-A), the installer from the rear Control Arm bushing service set (J 29376-A), and the 3/8 inch nut (J 21474-18). Use the 3/8 inch bolt (J 21474-19) to tighten it down until the bushing slides completely into the Control Arm before disassembling the installation tools. First install the bolts and washers and nuts before you manual-tighten the nuts and restore the wheel speed sensor harness on the rear axle. Reinstall brake hoses to the rear axle while adding tires and wheels and finally lower the vehicle. The final step involves tightening Control Arm nuts to a torque of 120 nm (52 ft. Lbs.).