How to replace the rear control arm bushing on 2004 Chevrolet Cavalier?

First raise and support the vehicle before removing the tire assemblies and wheel from the rear of the vehicle. First disconnect brake hoses from the axle then remove wheel speed sensor harness retainers from the axle. Start by removing bolts, washers, and nuts from the Control Arm. Then rotate the Control Arm downward to reach the bushings. Mount the rear Control Arm Bushing adapter (J 29376-95) onto the rear Control Arm before connecting the coupling from the rear Control Arm Bushing service set (J 29376-A) to this adapter. The necessary bushing removal tools consist of the 3/8 inch bolt (J 21474-19), the remover from the rear Control Arm Bushing service set (J 29376-A), the Pressure Plate from the rear Control Arm Bushing service set (J 29376-A), and the 3/8 inch nut (J 21474-18). After tightening the 3/8 inch bolt (J 21474-19) it should pull the bushing away from the Control Arm. Disassemble the bushing removal tools. To begin installation place a thin layer of grease on the exterior of the new bushing before you insert it into the Control Arm. Afterward gather your installation tools which consist of the 3/8 inch bolt (J 21474-19), the Pressure Plate from the rear Control Arm Bushing service set (J 29376-A), the installer from the rear Control Arm Bushing service set (J 29376-A), and the 3/8 inch nut (J 21474-18). Use the 3/8 inch bolt (J 21474-19) to tighten it while the bushing fully seats inside the Control Arm, afterward remove the bushing installation tools. After fitting the bolts together with washers and nuts tighten each nut by hand then ensure the wheel speed sensor harness and brake hoses connect to the rear axle. After completing rest of the installation place the tire and wheel assemblies then lower the vehicle before finishing with 120 n.m (52 lb ft) of torque on the Control Arm nuts.

OEM 2004 Chevrolet Cavalier Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Control Arm Bushings found

View related parts
2004 Chevrolet Cavalier Axle Bushing, Yellow, Rear
Part Number: 22597998
$29.58 MSRP: $36.25
You Save: $6.67 (19%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Axle Pivot Bushing; Axle Beam Mount; Axle Beam Bushing; Axle Assembly Bushing; Axle Arm Bushing; Bushing; Bushings
- Position: Rear
- Replaces: 10150337
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.4 x 3.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22597998
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Cavalier Submodels:
- Base, CL, CS, LS, LS Sport, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
2004 Chevrolet Cavalier Axle Bushing, Green, Rear
Part Number: 10150338
$17.48 MSRP: $35.74
You Save: $18.26 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Crossmember Bushing; Axle Pivot Bushing; Axle Beam Mount; Axle Beam Bushing; Bushing
- Position: Rear
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.3 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10150338
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2004 Chevrolet Cavalier Lower Control Arm Bushing, Front
Part Number: 22610297
$3.05 MSRP: $4.83
You Save: $1.78 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Lower Control Arm Rear Bushing; Bushings
- Position: Front Lower
- Replaced by: 22710854
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.5 x 3.2 x 2.6 inches
- Condition: New
- SKU: 22610297
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2004 Chevrolet Cavalier Lower Control Arm Bushing, Front
Part Number: 22645684
$18.81 MSRP: $37.76
You Save: $18.95 (51%)
ADD TO CART
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.1 x 2.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22645684
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2004 Chevrolet Cavalier Lower Control Arm Bushing, Front
Part Number: 22645683
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.4 x 1.8 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22645683
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2004 Chevrolet Cavalier Lower Control Arm Bushing
Part Number: 22613956
Product Specifications
- Other Name: Bushing, Steering Knuckle Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Bushings
- Position: Lower
- Item Weight: 1.20 Pounds
- Item Dimensions: 2.8 x 2.9 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22613956
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS

2004 Chevrolet Cavalier Control Arm Bushing

With a comprehensive array of OEM 2004 Chevrolet Cavalier Control Arm Bushing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Cavalier Control Arm Bushing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Cavalier Parts Questions & Experts Answers

Q: How to replace the rear control arm bushing on 2004 Chevrolet Cavalier?
A: First raise and support the vehicle before removing the tire assemblies and wheel from the rear of the vehicle. First disconnect brake hoses from the axle then remove wheel speed sensor harness retainers from the axle. Start by removing bolts, washers, and nuts from the Control Arm. Then rotate the Control Arm downward to reach the bushings. Mount the rear Control Arm Bushing adapter (J 29376-95) onto the rear Control Arm before connecting the coupling from the rear Control Arm Bushing service set (J 29376-A) to this adapter. The necessary bushing removal tools consist of the 3/8 inch bolt (J 21474-19), the remover from the rear Control Arm Bushing service set (J 29376-A), the Pressure Plate from the rear Control Arm Bushing service set (J 29376-A), and the 3/8 inch nut (J 21474-18). After tightening the 3/8 inch bolt (J 21474-19) it should pull the bushing away from the Control Arm. Disassemble the bushing removal tools. To begin installation place a thin layer of grease on the exterior of the new bushing before you insert it into the Control Arm. Afterward gather your installation tools which consist of the 3/8 inch bolt (J 21474-19), the Pressure Plate from the rear Control Arm Bushing service set (J 29376-A), the installer from the rear Control Arm Bushing service set (J 29376-A), and the 3/8 inch nut (J 21474-18). Use the 3/8 inch bolt (J 21474-19) to tighten it while the bushing fully seats inside the Control Arm, afterward remove the bushing installation tools. After fitting the bolts together with washers and nuts tighten each nut by hand then ensure the wheel speed sensor harness and brake hoses connect to the rear axle. After completing rest of the installation place the tire and wheel assemblies then lower the vehicle before finishing with 120 n.m (52 lb ft) of torque on the Control Arm nuts.