Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2004 Chevrolet Cavalier Wheel Seal

Wheel Axle Seal
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Seal found

  • 2004 Chevy Cavalier Wheel Seal - 26049394
    2004 Chevy Cavalier Wheel Seal Diagram - 26049394
    View related parts

    2004 Chevrolet Cavalier Dust Seal, Rear

    Part Number: 26049394
    $7.49 MSRP: $20.46
    You Save: $12.97 (64%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Seal, Rear Axle; Power Steering Cylinder Boot Kit; Inner Tie Rod Cover; Tie Rod Seal; Outer Boot; Dust Shield; Grease Seal; Dust Cap; Assembly Seal; Lock Nut Seal.
    • Position: Rear
    • Replaces: 07828084, 7828084
    • Item Weight: 0.30 Pounds
    • Item Dimensions: 2.4 x 2.4 x 1.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 26049394
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2004 Chevrolet Cavalier Submodels:
    • Base, LS, LS Sport, RS, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS

2004 Chevrolet Cavalier Wheel Seal

With a comprehensive array of OEM 2004 Chevrolet Cavalier Wheel Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Cavalier Wheel Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Cavalier Wheel Seal Parts Questions & Experts Answers

  • Q: How to replace the axle shaft sleeve and Wheel Seal on 2004 Chevrolet Cavalier?
    A: A proper procedure for replacing the Axle Shaft sleeve and seal starts with vehicle support and removal of the drive axle assembly and snap ring before extracting the stub axle seal. The output shaft sleeve remover (J 41227) needs to be used to pull the sleeve out through the stub axle. You must replace the stub Axle Shaft sleeve together with its seal because independent replacement is not recommended. The stub shaft sleeve installer (J 41228) needs to be used for putting a new sleeve onto the stub Axle Shaft while making sure the collet rests in the snap ring groove. Reinstall the drive axle assembly after you install new snap rings together with the output shaft and the new stub axle seal. Check the vehicle height while doing a leak inspection on the output Axle Shaft sleeve and verify the transmission oil level.

Related 2004 Chevrolet Cavalier Parts

Alternate Year Models

+
2003 Chevrolet Cavalier Wheel Seal 2005 Chevrolet Cavalier Wheel Seal