Other Name: Handle; Interior Door Handle; Handle, Door Lock Inside Handle
Position: Passenger Side
Condition: New
Fitment Type: Direct Replacement
SKU: 10434206
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following 2003 Chevrolet Impala Submodels:
Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
2003 Chevrolet Impala Door Handle
With a comprehensive array of OEM 2003 Chevrolet Impala Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Impala Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2003 Chevrolet Impala Door Handle Parts Questions & Experts Answers
Q: How to replace the front outside door handle on 2003 Chevrolet Impala?
A: The first task for handling an Impala front outside door handle replacement involves raising your window completely and wrapping painted areas with two layers of masking tape. Set aside the front door trim panel together with the water deflector and rear window channel bolt prior to releasing the rear window channel with downward tugging motion. Detach the rod-to-lock clip of the outside door handle while removing the lock cylinder from its housing. You can access one of the two bolts for the outer door handle after removing its hole plug before removing the outside door handle with its rod. The installation process starts by fixing the door handle lock cylinder retainer clip to the door handle after which you should connect the handle rod and bolt down the outside door handle to its installation spot. Secure the outer door handle bolts to 10 N.m (89 lb in) torque before putting back the lock cylinder and new outside handle rod-to-lock clip and position the rod correctly to remove any motion between parts. When installing the rear window channel replace the threaded rod cover followed by rear window channel reinstallation to secure the up clip until you bolt the channel with a torque value of 10 N.m (89 lb in). You must install the access hole plug together with the water deflector and trim panel.