Other Name: Handle; Interior Door Handle; Handle, Door Lock Inside Handle
Position: Passenger Side
Condition: New
Fitment Type: Direct Replacement
SKU: 10434206
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following 2004 Chevrolet Impala Submodels:
Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
2004 Chevrolet Impala Door Handle
With a comprehensive array of OEM 2004 Chevrolet Impala Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Impala Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Chevrolet Impala Door Handle Parts Questions & Experts Answers
Q: How to replace the front outside door handle on 2004 Chevrolet Impala?
A: Begin by raising the window and applying two layers of masking tape around painted areas before handling the front outside Door Handle of an impala. The first step involves removing the front door trim panel while subsequently removing the front door water deflector. The next step requires pulling down on the front door rear window channel bolt which disconnects the channel from its slot. Start by unfastening the lock clip linking the Door Handle rod to the door lock followed by removal of the front door outside handle lock cylinder. You will reach the bolt attachment by first removing the hole plug before proceeding with the front door outside Door Handle removal and its rod. You must connect the Door Handle rod to the handle after attaching the lock cylinder retainer clip to the Door Handle. During the front outside Door Handle installation align it properly on the door then fasten the bolts to 10 n.m (89 lb in). Secure the front door outside handle lock cylinder followed by a brand-new outside handle rod-to-lock clip onto the door lock lever while positioning the outside Door Handle rod within the clip to prevent any loose motion. You need to attach the clip cover to the outside Door Handle rod thread before reinstalling the front door rear window channel by making sure the up clip is in position and tightening it to 10 n.m (89 lb in). Begin theiminial process by placing back the access hole plug and front door water deflector and front door trim panel.