Make sure this part fits

GM 10331594
Handle, Outside, Passenger Side

1997-2008 GM

Customer Questions & Expert Answers (16)
GM 10331594 Handle, Outside, Passenger Side
  • Part Description
    Handle, Door Outside Handle; Exterior Door Handle
  • Position
    Passenger Side
  • Replaces
    10308590
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2004 Buick RegalGS, LS6 Cyl 3.8 L GAS
    2000-2005 Chevrolet ImpalaBase, LS, LS Sport, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2004-2008 Pontiac Grand PrixBase, GT, GT1, GT2, GTP, GXP6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10331594 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10331594 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the front door exterior handle for the 2004 Buick Century? Posted by Customer
    A:
    Apply masking tape to the front door outer panel around the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation process for the 2001 Buick Century? Posted by Customer
    A:
    Attach the outside handle rod to the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How is the handle removed from the inner panel for the 2002 Buick Century? Posted by Customer
    A:
    Take the handle off the inner panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for tightening the bolts for the 2000 Buick Century? Posted by Customer
    A:
    Tighten the bolts to 10 Nm (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after positioning the handle for the 2002 Buick Century? Posted by Customer
    A:
    Rotate the lock cylinder pawl again to clear the door handle opening, then install the outside door handle bolts, tightening them to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the process for installing the new door handle for the 2003 Buick Century? Posted by Customer
    A:
    Position the door handle tabs in the door, attach the handle rod and secure it with the clip, followed by the lock rod in the same manner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What safety precautions should be taken while removing the trim panel for the 2005 Buick Century? Posted by Customer
    A:
    Adhere to standard shop practices, especially wearing eye protection, to prevent personal injury.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation process for the 2004 Buick Regal? Posted by Customer
    A:
    Attach the handle rod to the new outside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What components need to be removed to access the outside handle for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Remove the front door trim panel, water deflector, and rear window channel bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you secure the outside door handle for the 2003 Chevrolet Impala? Posted by Customer
    A:
    Connect the handle rod and secure the outside door handle to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the trim panel and water deflector for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Unsnap the clip from the outside handle rod and discard the rod-to-lock clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the installation process for the new outside door handle for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Position the rear door outside door handle and the handle rod to the rear door, ensuring to install the three rear door outside door handle bolts and tighten them to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be removed after applying masking tape for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Remove the front door trim panel, followed by the front door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the installation process for the new rear door outside door handle for the 2005 Chevrolet Impala? Posted by Customer
    A:
    Position the new rear door outside door handle and handle rod onto the rear door, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new outside door handle for the 2002 Chevrolet Impala? Posted by Customer
    A:
    Position the new outside door handle and handle rod onto the rear door, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Outside, Passenger Side 10331594 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10331594 Handle, Outside, Passenger Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10331594 Handle, Outside, Passenger Side fits certain Chevrolet Impala models, as well as Buick Regal, Century. Additionally, it is compatible with Pontiac Grand Prix models.
The original GM component designated by manufacturer part number 10331594 maintains top performance when functioning as the Handle, Door Outside Handle; Exterior Door Handle unit at its Passenger Side. The component 10331594 is constructed from durable material and its dimensions span 5.2 x 5.3 x 11.1 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10331594 has available replacement options 10308590. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.