Make sure this part fits

GM 10439378
Handle, Outside, Driver Side

1997-2008 GM

Customer Questions & Expert Answers (26)
GM 10439378 Handle, Outside, Driver Side
  • Part Description
    Handle, Door Outside Handle; Exterior Door Handle
  • Position
    Driver Side
  • Replaces
    10285449, 10275251, 10275243, 10406557, 10275253, 10439616, 10406559, 10439606, 10439614, 10275241, 10439604, 10275257, 10308591, 10439612, 10439622, 10406581, 10439618, 10444212
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    1997-2004 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    2000-2005 Chevrolet ImpalaBase, LS, LS Sport, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    1997-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    2004-2008 Pontiac Grand PrixBase, GT, GT1, GT2, GTP, GXP6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10439378 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10439378 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the rear side door inside handle for the 2001 Buick Regal? Posted by Customer
    A:
    Position the window fully up.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you detach the outside handle rod-to-lock clip for the 2002 Buick Century? Posted by Customer
    A:
    Use side cutters to cut off the outside handle rod-to-lock clip from the lock, then unscrew the remainder of the clip from the outside handle rod and discard it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How should the rivet be handled while driving the mandrel out for the 2002 Buick Century? Posted by Customer
    A:
    Support the back side of the rivet to avoid bending the metal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What tool is used to remove the rivet mandrel for the 2003 Buick Century? Posted by Customer
    A:
    A center punch is used to remove the rivet mandrel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after disconnecting the rods for the 2004 Buick Century? Posted by Customer
    A:
    Remove the bolts securing the outside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be removed after applying masking tape for the 2001 Buick Century? Posted by Customer
    A:
    Remove the rear door water deflector and the rear door energy absorber pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How should you support the rivet while removing it for the 2005 Buick Century? Posted by Customer
    A:
    Support the back side of the rivet while driving the mandrel out to avoid bending the metal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be connected after installing the outside handle for the 2000 Buick Century? Posted by Customer
    A:
    Connect the outside handle lock rod to the rear door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the bolts for the 2004 Buick Regal? Posted by Customer
    A:
    Rotate the handle to clear the opening and detach the handle rod from the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What tool is used to remove the rivet mandrel for the 2000 Buick Regal? Posted by Customer
    A:
    A center punch is used to remove the rivet mandrel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the installation process for the 2002 Buick Regal? Posted by Customer
    A:
    Close the clip cover over the threaded outside door handle rod, then reinstall the water deflector, the energy absorber pad, and finally the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What are the final steps after installing the new door handle for the 2001 Buick Regal? Posted by Customer
    A:
    Install a new door handle rivet, reattach the trim panel, and close the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear inside door handle for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Raise the rear door window to the full up position and remove the rear door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear door exterior handle for the 2005 Chevrolet Classic? Posted by Customer
    A:
    Raise the window to the full up position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new handle for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Install the handle by pressing it in until fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after positioning the door handle for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Install the door handle bracket and outside door handle nut, tightening the nut to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the process for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Close the clip cover over the threaded outside door handle rod, then reinstall the rear door water deflector and the rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after securing the handle rod for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Cover the threaded outside door handle rod with the clip cover, then reinstall the front door rear window channel, ensuring the up clip is engaged, and secure it with the bolt tightened to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after unsnapping the clip for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Remove the rear door outside door handle bolt access plug and the three bolts securing the outside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you remove the rear door outside door handle for the 2005 Chevrolet Impala? Posted by Customer
    A:
    Carefully take out the rear door outside door handle along with the handle rod, then separate the handle rod from the outside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after positioning the door outside handle for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Install the door lock cylinder rod to the front door lock cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the rivet and screw for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Detach the rod from the door inside handle and remove the handle itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the installation process for the 2002 Chevrolet Impala? Posted by Customer
    A:
    Close the clip cover over the threaded outside door handle rod, then reinstall the rear door water deflector and the rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after securing the outside door handle for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Reinstall the lock cylinder and a new outside handle rod-to-lock clip, ensuring the rod is positioned to eliminate any free play.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What are the final steps in the replacement process for the 2003 Chevrolet Impala? Posted by Customer
    A:
    Replace the access hole plug, water deflector, and trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Outside, Driver Side 10439378 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10439378 Handle, Outside, Driver Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10439378 Handle, Outside, Driver Side fits certain Chevrolet Malibu, Impala, Classic models, as well as Buick Regal, Century. Additionally, it is compatible with Pontiac Grand Prix and Oldsmobile Cutlass models.
The original GM component designated by manufacturer part number 10439378 maintains top performance when functioning as the Handle, Door Outside Handle; Exterior Door Handle unit at its Driver Side. The component 10439378 is constructed from durable material and its dimensions span 4.2 x 4.1 x 15.8 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10439378 has available replacement options 10285449, 10275251, 10275243, 10406557, 10275253, 10439616, 10406559, 10439606, 10439614, 10275241, 10439604, 10275257, 10308591, 10439612, 10439622, 10406581, 10439618, 10444212. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.