How to replace the left I/P Fuse Box on 2003 Chevrolet Impala?

The replacement process of a left i/p electrical center or junction block starts with disconnecting the negative Battery Cable. First adjust the instrument panel cluster trim plate to gain access for the process then remove the body wiring harness from the junction block. You should remove bolts from the junction block as well as the junction block tab from its slot in the cross vehicle beam to move the block away from the ip. You should join the body wiring harness to the new junction block before putting the junction block tab inside the slot on the cross vehicle beam. Secure it with junction block bolts set to 10 n.m (89 lb in). Secure the body wiring harness connector to the junction block by tightening its bolt to 7 n.m (62 lb in). The instrument panel cluster trim plate needs reinstallation followed by negative Battery Cable reconnection.

OEM 2003 Chevrolet Impala Fuse Box

Fuse Holder Box

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuse Boxes found

View related parts
2003 Chevrolet Impala Fuse & Relay Box
Part Number: 15329229
Product Specifications
- Other Name: Block Assembly-Accessory Wiring Junction; Junction Boxes; Relay Boxes; Fuse Box; Block, Main Wiring Junction And Fuse Block
- Item Weight: 3.10 Pounds
- Item Dimensions: 9.8 x 8.3 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15329229
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Impala Fuse & Relay Box, Passenger Side
Part Number: 12176369
Product Specifications
- Other Name: Block, Main Wiring Junction And Fuse Block; Junction Boxes; Relay Boxes; Fuse Box
- Position: Passenger Side
- Replaces: 12129995
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.3 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12176369
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Impala Fuse & Relay Box
Part Number: 15329230
Product Specifications
- Other Name: Block Assembly-Accessory Wiring Junction; Junction Boxes; Relay Boxes; Fuse Box; Block, Main Wiring Junction And Fuse Block
- Item Weight: 1.90 Pounds
- Item Dimensions: 9.1 x 8.5 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15329230
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2003 Chevrolet Impala Fuse Box

With a comprehensive array of OEM 2003 Chevrolet Impala Fuse Box, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Impala Fuse Box are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the left I/P Fuse Box on 2003 Chevrolet Impala?
A: The replacement process of a left i/p electrical center or junction block starts with disconnecting the negative Battery Cable. First adjust the instrument panel cluster trim plate to gain access for the process then remove the body wiring harness from the junction block. You should remove bolts from the junction block as well as the junction block tab from its slot in the cross vehicle beam to move the block away from the ip. You should join the body wiring harness to the new junction block before putting the junction block tab inside the slot on the cross vehicle beam. Secure it with junction block bolts set to 10 n.m (89 lb in). Secure the body wiring harness connector to the junction block by tightening its bolt to 7 n.m (62 lb in). The instrument panel cluster trim plate needs reinstallation followed by negative Battery Cable reconnection.