OEM 2003 Chevrolet Malibu Wiper Motor

2003 Chevrolet Malibu Wiper Motor Parts Questions & Experts Answers

• Q: How to replace the wiper motor on 2003 Chevrolet Malibu?

  A: In order to remove the wiper motor, start by removing the air inlet grille panel. Then, disconnect the wiper motor electrical connector. Next, take out the screws that anchor the wiper drive system module and extract the module from the vehicle. Remove the screws that hold the wiper motor to wiper transmission, using the Wiper Transmission Separator (J 39232) to separate the wiper transmission from the wiper motor crank arm, then take the wiper motor from the wiper transmission. For installation, place the newly purchased wiper motor on the wiper transmission, then tighten the wiper motor screws to 10 N.m (89 lb in). Next, attach the wiper transmission to the wiper motor crank arm using the Wiper Transmission Installer (J 39529). Adjust the wiper drive system module to its ostensible place in the vehicle and install its screws while tightening them until it reaches 10 N.m (89 lb in). Lastly, connect the wiper motor electrical connector and replace air inlet grille panel.