OEM 2004 Chevrolet Malibu Wiper Motor

2004 Chevrolet Malibu Wiper Motor Parts and Q&A

• Q: How to replace the wiper motor on 2004 Chevrolet Malibu?

  A: Use only two wrenches J 39232 and J 39529 for this repair. First remove the wiper arms then the air inlet grille panel. Then you can continue working on the wiper drive system module. Pull apart the wiper transmission links from the wiper motor crank arm using the Wiper Linkage Separator (J 39232) before removing the two bolts that connect the wiper motor. Separate the spacer from the wiper drive system module and take out the wiper motor from that module. Next remove the wiper motor module support bracket from its attachment to the wiper motor. Put the wiper motor module support bracket on the wiper motor unit before placing the wiper motor onto the wiper drive system module . Install the spacer on top of the wiper drive system module . Use a torque tool to fasten the wiper motor bolts to 4.5 N.m torque value (40 lb inch). Put the wiper transmission links on the wiper motor crank arm through Wiper Linkage Installer (J 39529). Next install the wiper drive system module, the air inlet grille panel, and wiper arms while following these steps. Verify the washer operation at the end of this process.