How to replace the front side door lock actuator on 2004 Chevrolet Malibu?

The front side Door Lock Actuator replacement must start with removing the door trim panel followed by the water deflector and Door Latch Assembly. Proceed by unplugging the two screws that fasten the actuator to the lock. First lift the actuator at the same time as rotating it to detach the rubber Bumper from the latch before pulling out the actuator from the latch. The installation starts by mounting the rubber Bumper onto the latch and then rotating the actuator until the rubber Bumper fully engages its position. Guarantee that the initial tooth alignment of the actuator gear matches with its corresponding first tooth on the latch gear before moving forward. Mount the actuator onto the latch top section before fastening it with two screws that should reach 0.75 n.m torque (6 lb in of force). Install the lock to the door surface before attaching the water deflector before completing the installation with the door trim panel.

OEM 2004 Chevrolet Malibu Door Lock Actuator

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Door Lock Actuators found

View related parts
2004 Chevrolet Malibu Lock
Part Number: 15145724
Product Specifications
- Other Name: Latch Assembly-Lift Gate; Door Lock; Latch, Rear Compartment Lid Or Tail Gate Latch
- Replaces: 22721595
- Item Weight: 1.10 Pounds
- Item Dimensions: 7.0 x 6.3 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15145724
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2004 Chevrolet Malibu Lock, Rear Driver Side
Part Number: 15814417
Product Specifications
- Other Name: Lock Assembly-Rear Side Door Left-Hand; Door Latch Assembly; Door Lock; Latch; Lock, Rear Side Door
- Position: Rear Driver Side
- Replaces: 10376725, 15253462, 22722689, 22735122
- Item Weight: 1.30 Pounds
- Item Dimensions: 10.1 x 5.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15814417
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Chevrolet Malibu Lock, Rear Passenger Side
Part Number: 15814416
Product Specifications
- Other Name: Lock Assembly, Rear Side Door; Door Latch Assembly; Door Lock; Latch; Lock, Rear Side Door
- Position: Rear Passenger Side
- Replaces: 15253461, 22735121, 10376726, 22722688
- Item Weight: 1.20 Pounds
- Item Dimensions: 8.2 x 4.6 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15814416
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Chevrolet Malibu Lock, Front Passenger Side
Part Number: 15814415
Product Specifications
- Other Name: Lock Assembly-Front Side Door Right-Hand; Door Latch Assembly; Door Lock; Latch; Lock, Front Side Door
- Position: Front Passenger Side
- Replaces: 15253463, 22722690, 10376724
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.5 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15814415
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Chevrolet Malibu Lock, Front Driver Side
Part Number: 15814414
Product Specifications
- Other Name: Lock, Front Side Door; Door Latch Assembly; Door Lock; Latch
- Position: Front Driver Side
- Replaces: 15253464, 22722691, 10376723
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.8 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15814414
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Chevrolet Malibu Lock, Rear
Part Number: 20774887
Product Specifications
- Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch, Rear Compartment Lid Release Or Ajar
- Position: Rear
- Replaces: 12450614, 15147114, 25795319, 22727953
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.1 x 6.5 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20774887
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS

2004 Chevrolet Malibu Door Lock Actuator

With a comprehensive array of OEM 2004 Chevrolet Malibu Door Lock Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Malibu Door Lock Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Malibu Door Lock Actuator Parts Questions & Experts Answers

Q: How to replace the front side door lock actuator on 2004 Chevrolet Malibu?
A: The front side Door Lock Actuator replacement must start with removing the door trim panel followed by the water deflector and Door Latch Assembly. Proceed by unplugging the two screws that fasten the actuator to the lock. First lift the actuator at the same time as rotating it to detach the rubber Bumper from the latch before pulling out the actuator from the latch. The installation starts by mounting the rubber Bumper onto the latch and then rotating the actuator until the rubber Bumper fully engages its position. Guarantee that the initial tooth alignment of the actuator gear matches with its corresponding first tooth on the latch gear before moving forward. Mount the actuator onto the latch top section before fastening it with two screws that should reach 0.75 n.m torque (6 lb in of force). Install the lock to the door surface before attaching the water deflector before completing the installation with the door trim panel.