OEM 2004 Chevrolet Malibu Emblem

2004 Chevrolet Malibu Emblem Parts Questions & Experts Answers

• Q: How to replace the liftgate emblem/nameplate on 2004 Chevrolet Malibu?

  A: Before installation you must create alignment marks and cover the underlying area with tape to replace the liftgate emblem/nameplate. Use a heat gun at 152mm distance to warm the emblem/nameplate for 30 seconds in circular motions. Gently pull the emblem/nameplate away from the panel with a fire-safe flat plastic tool. Use 3M Scotch Brite disk 07501 to remove adhesive from body panels while using VMP Naphtha or 50% isopropyl alcohol water mixture plus a lint-free cloth for plastic panels. Wipe the area of installation with the same cloth and solution while removing all dust particles then dry it completely. When the liftgate emblem/nameplate location is not indicated use tape then position the emblem at 44 mm width (1.75 in) and 47 mm length (1.8 in) while keeping 250 mm distance (10 in) from one edge, set a gap of 44 mm (1.75 in) between the nameplate edges and keep it 125 mm away (5 in) from another edge. Prepare the mounting area by heating it to 80-105°F and keep the emblem/nameplate temperature at 85-90°F. Simply handle the lettering without the adhesive to take off its protective liner. Align the marked spots on the badge with the mounting surface and flatten it evenly using constant push force. Take off the protective tape from where you mount the item.