How to replace the front Door Latch Assembly on 2004 Chevrolet Malibu?

The process of front Door Lock replacement starts with the removal of front door trim panel and water deflector. Begin the front Door Lock replacement by disconnection the rods at the inside Door Handle points and then extract the clip that maintains rod attachment to the door. First disconnect both exterior Door Handle parts together with the screws numbered 1 through 3 that anchor the lock to the front door surface. Dispose of the lock while keeping its inside rod connections intact then disconnect electrical wires and extract the window guide from inside the lock. The inside Door Handle rods need attachment to the lock followed by addition of the front door window guides to the lock assembly. Insert the Door Lock through the access hole inside the door inner panel after reconnecting electrical connectors. Tighten the Door Lock screws at 10 n.m (89 lb in) according to the correct order by starting with the top screw followed by the bottom screw and finishing with the middle screw. The installation of a new clip must happen to join the outside handle rod with the Door Lock lever while correctly positioning the rod inside the clip for outside Door Handle smoothness. Affix the clip cover on the threaded rod before adding the clip to the inside handle rods and attaching these rods to the handle. The last steps involve replacing the trim panel along with the water deflector while performing a check of the entire Door Lock system to verify proper functioning.

OEM 2004 Chevrolet Malibu Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Door Latch Assemblys found

View related parts
2004 Chevrolet Malibu Lock Part Number: 15145724
Product Specifications
- Other Name: Latch Assembly-Lift Gate; Door Lock; Latch, Rear Compartment Lid Or Tail Gate Latch
- Replaces: 22721595
- Item Weight: 1.10 Pounds
- Item Dimensions: 7.0 x 6.3 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15145724
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2004 Chevrolet Malibu Lock, Rear Driver Side Part Number: 15814417
Product Specifications
- Other Name: Lock Assembly-Rear Side Door Left-Hand; Door Latch Assembly; Door Lock; Latch; Lock, Rear Side Door
- Position: Rear Driver Side
- Replaces: 10376725, 15253462, 22722689, 22735122
- Item Weight: 1.30 Pounds
- Item Dimensions: 10.1 x 5.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15814417
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Chevrolet Malibu Lock, Rear Passenger Side Part Number: 15814416
Product Specifications
- Other Name: Lock Assembly, Rear Side Door; Door Latch Assembly; Door Lock; Latch; Lock, Rear Side Door
- Position: Rear Passenger Side
- Replaces: 15253461, 22735121, 10376726, 22722688
- Item Weight: 1.20 Pounds
- Item Dimensions: 8.2 x 4.6 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15814416
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Chevrolet Malibu Lock, Front Passenger Side Part Number: 15814415
Product Specifications
- Other Name: Lock Assembly-Front Side Door Right-Hand; Door Latch Assembly; Door Lock; Latch; Lock, Front Side Door
- Position: Front Passenger Side
- Replaces: 15253463, 22722690, 10376724
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.5 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15814415
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Chevrolet Malibu Lock, Front Driver Side Part Number: 15814414
Product Specifications
- Other Name: Lock, Front Side Door; Door Latch Assembly; Door Lock; Latch
- Position: Front Driver Side
- Replaces: 15253464, 22722691, 10376723
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.8 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15814414
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Chevrolet Malibu Lock, Rear Part Number: 20774887
Product Specifications
- Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch, Rear Compartment Lid Release Or Ajar
- Position: Rear
- Replaces: 12450614, 15147114, 25795319, 22727953
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.1 x 6.5 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20774887
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS

2004 Chevrolet Malibu Door Latch Assembly

With a comprehensive array of OEM 2004 Chevrolet Malibu Door Latch Assembly, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Malibu Door Latch Assembly are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Malibu Door Latch Assembly Parts and Q&A

Q: How to replace the front Door Latch Assembly on 2004 Chevrolet Malibu?
A: The process of front Door Lock replacement starts with the removal of front door trim panel and water deflector. Begin the front Door Lock replacement by disconnection the rods at the inside Door Handle points and then extract the clip that maintains rod attachment to the door. First disconnect both exterior Door Handle parts together with the screws numbered 1 through 3 that anchor the lock to the front door surface. Dispose of the lock while keeping its inside rod connections intact then disconnect electrical wires and extract the window guide from inside the lock. The inside Door Handle rods need attachment to the lock followed by addition of the front door window guides to the lock assembly. Insert the Door Lock through the access hole inside the door inner panel after reconnecting electrical connectors. Tighten the Door Lock screws at 10 n.m (89 lb in) according to the correct order by starting with the top screw followed by the bottom screw and finishing with the middle screw. The installation of a new clip must happen to join the outside handle rod with the Door Lock lever while correctly positioning the rod inside the clip for outside Door Handle smoothness. Affix the clip cover on the threaded rod before adding the clip to the inside handle rods and attaching these rods to the handle. The last steps involve replacing the trim panel along with the water deflector while performing a check of the entire Door Lock system to verify proper functioning.