OEM 2005 Chevrolet Malibu Emblem

2005 Chevrolet Malibu Emblem Parts Questions & Experts Answers

• Q: How to Replace a Liftgate Emblem on 2005 Chevrolet Malibu?

  A: Before putting on the liftgate emblem/nameplate start with surface protection followed by marking the installation points. Apply heat from a gun to the emblem/nameplate through circular motion for 30 seconds while maintaining the heat gun a distance of 152 mm (6 inches) from its surface. A plastic flat-bladed tool must be used carefully to remove the emblem/nameplate from the panel. Gently wipe the installation area with either a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07501) or Varnish Makers and Painters (VMP) Naphtha blended with a 50/50 solution of water and isopropyl alcohol to clean plastic surfaces and body panels. Wipe down both the installation spot and the emblem/nameplate with the same cleaning instrument before you dry the area completely. Apply tape to an unmarked liftgate emblem/nameplate location while working with these dimensions: Body panels require the dimensions A 44 mm (1.75 in) and B 47 mm (1.8 in) and C 250 mm (10.0 in) while plastic surfaces need dimensions D 44 mm (1.75 in) and E 125 mm (5.0 in). Dimension A is 44 mm (1.75 in), Dimension B is 47 mm (1.8 in), Dimension C is 250 mm (10.0 in), Dimension D is 44 mm (1.75 in), and Dimension E is 125 mm (5.0 in). The surface measuring 27-41°C (80-105°F) requires heating for application that requires 29-32°C (85-90°F). To install the emblem/nameplate keep the adhesive backing untouched before removing the protective liner. Place the emblem or nameplate on its mark position then firmly apply uniform pressure to make a complete bond against the mounting surface. Remove all protective tape from the surface where you will mount the item.