How to replace the A/C Orifice Tube on 2003 Chevrolet Monte Carlo?

To replace the A/C Orifice Tube, first remove the condenser tube. Use the Orifice Tube Remover to extract the tube. Inspect for damage; replace if necessary. Clean the inlet filter with low pressure shop air if coated, but do not reuse O-ring seals. Lubricate new seals with refrigerant oil before reinstalling.

OEM 2003 Chevrolet Monte Carlo A/C Orifice Tube

A/C Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Orifice Tube found

View related parts
2003 Chevrolet Monte Carlo Orifice Part Number: 10411717
Product Specifications
- Other Name: Orifice, Air Conditioner Expansion Refrigerant; A/C Evaporator Core Repair Kit; A/C Orifice Tube; Orifice, A/C Expansion Refrigerant
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.1 x 1.0 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10411717
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2003 Chevrolet Monte Carlo A/C Orifice Tube

With a comprehensive array of OEM 2003 Chevrolet Monte Carlo A/C Orifice Tube, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Monte Carlo A/C Orifice Tube are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Monte Carlo A/C Orifice Tube Parts and Q&A

Q: How to replace the A/C Orifice Tube on 2003 Chevrolet Monte Carlo?
A: To replace the A/C Orifice Tube, first remove the condenser tube. Use the Orifice Tube Remover to extract the tube. Inspect for damage; replace if necessary. Clean the inlet filter with low pressure shop air if coated, but do not reuse O-ring seals. Lubricate new seals with refrigerant oil before reinstalling.