How to service the Ignition Control Module on 2003 Chevrolet Monte Carlo?

To service the ignition controll module, firstly; disconnect the Ignition Control Module (ICM) electrical connectors. Mark the Spark Plug Wires places for installation, disconnecting it from the ignition coils. Remove Ignition Coil screws and then remove ignition coils from the icm. Next, do pull off the icm from the module mount bracket. For installation, replace the icm on to the module bracket and install the ignition coils on to the icm, tighten them with the Ignition Coil screws to a torque of 4.5 n.m (40 lb in). Finally, replace the Spark Plug Wires as previously marked and connect the icm electrical connectors.

OEM 2003 Chevrolet Monte Carlo Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Control Modules found

View related parts
2003 Chevrolet Monte Carlo Ignition Module
Part Number: 19245558
$264.99 MSRP: $544.54
You Save: $279.55 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Ignition Coil; Ignition Control Module; Engine Control Module; Coil Module; PCM; Module; ECM; Module, Distributor (Also Knock Sensor)
- Replaced by: 19435469
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.7 x 4.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19245558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
2003 Chevrolet Monte Carlo Control Module
Part Number: 19245557
$221.80 MSRP: $455.78
You Save: $233.98 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Electronic Ignition Control (W/O Coil); Ignition Control Module; Ignition Module; Coil Module; Module; Bracket, Distributor (Also Knock Sensor); Module, Distributor (Also Knock Sensor)
- Replaces: 10489422
- Item Weight: 1.00 Pounds
- Item Dimensions: 7.8 x 4.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19245557
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS

2003 Chevrolet Monte Carlo Ignition Control Module

With a comprehensive array of OEM 2003 Chevrolet Monte Carlo Ignition Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Monte Carlo Ignition Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to service the Ignition Control Module on 2003 Chevrolet Monte Carlo?
A: To service the ignition controll module, firstly; disconnect the Ignition Control Module (ICM) electrical connectors. Mark the Spark Plug Wires places for installation, disconnecting it from the ignition coils. Remove Ignition Coil screws and then remove ignition coils from the icm. Next, do pull off the icm from the module mount bracket. For installation, replace the icm on to the module bracket and install the ignition coils on to the icm, tighten them with the Ignition Coil screws to a torque of 4.5 n.m (40 lb in). Finally, replace the Spark Plug Wires as previously marked and connect the icm electrical connectors.