Other Name: Module Assembly, Ignition Coil; Ignition Control Module; Engine Control Module; Coil Module; PCM; Module; ECM; Module, Distributor (Also Knock Sensor)
Replaced by: 19435469
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1998-2005 Chevrolet Monte Carlo | LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; Distributor Rotor; ESC Control Module; Rotor
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984 Chevrolet Monte Carlo | Base | 6 Cyl 3.8 L GAS
Chevrolet Monte Carlo Ignition Control Module
Our website offers an extensive catalog of genuine Chevrolet Monte Carlo Ignition Control Module at unbeatable prices. Every OEM Chevrolet Monte Carlo Ignition Control Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Monte Carlo Ignition Control Module Parts Questions & Experts Answers
Q: How to service the Ignition Control Module on Chevrolet Monte Carlo?
A: Service operations on the Ignition Control Module require switching off ignition power first. Separate the 14-way connector from the Ignition Control Module while you remove the Spark Plug Wires from the coil assemblies, documenting their initial positions. Start by unscrewing and removing the 6 stud screws which bind the coil assemblies to the Ignition Control Module to finally remove the coils from the module. Washers and 2 nuts located beneath the module bracket enable detachment of the Ignition Control Module. Secure the module on the module bracket using two nuts and washers which should be tightened to 8 n.m (70 lb in). Connect each coil to its spot on the Ignition Control Module before tightening the 6 ignition coil attaching screws to 4.5 newton meters (40 pounds inch force). You should reconnect the Spark Plug Wires together with the 14-way connector to the module.