How to replace the ABS Control Module on 2004 Buick Rainier?

Vehicle elevation is necessary to disconnect both electrical connectors located on the side of the ABS Control Module. A long flat-bladed screwdriver should be used to activate the lock tab present on the ABS Control Module's electrical connector which is found at the back. The installation of T 25-TORX bit requires clean TORX screw heads; if 25-TORX-3 screws show damage or cannot be removed then both ABS Control Module and BPMV need replacement. Loosen the four mounting screws with the T 25-TORX bit while applying light pressure but avoiding ABS Control Module or BPMV distortion before pulling away the ABS Control Module from the BPMV. Upon installation avoid repeated usage of old screws and always use fresh screws with new ABS Control Module equipment and skip the application of RTV or any sealant when assembling the ABS Control Module gasket along with mating surfaces. The ABS Control Module needs to be positioned onto the BPMV before torquing the four new T-25 TORX screws to 5 Nm (39 inch lbs.) through an X-pattern configuration. Connect the electrical wire connectors on both sides of the ABS Control Module while also attaching the connector at the back of the ABS Control Module before lowering the vehicle. Terminate the procedure by executing the Tire Size Calibration function through the Scan Tool.

OEM 2004 Buick Rainier ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 ABS Control Modules found

View related parts
2004 Buick Rainier Control Module Part Number: 19417938
$479.94 MSRP: $897.80
You Save: $417.86 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module
- Replaces: 10356388, 15125070, 19370892
- Item Weight: 1.70 Pounds
- Item Dimensions: 7.9 x 6.6 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19417938
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2004 Buick Rainier Control Module Part Number: 19244909
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module
- Replaces: 19148793, 19301636, 88964385, 88982341
- Item Weight: 1.70 Pounds
- Item Dimensions: 7.7 x 6.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244909
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2004 Buick Rainier Pressure Valve Part Number: 89027155
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; ABS Control Module; Modulator Valve; Valve Assembly; Valve, Electronic Brake Control
- Replaces: 88935739, 88964381, 88982303
- Item Weight: 6.70 Pounds
- Item Dimensions: 8.1 x 7.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89027155
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2004 Buick Rainier Pressure Valve Part Number: 89027152
Product Specifications
- Other Name: Valve, Brake Pressure Mode; ABS Control Module; Modulator Valve; Valve Assembly; Valve, Electronic Brake Control
- Replaces: 88964383
- Item Weight: 7.40 Pounds
- Item Dimensions: 12.1 x 10.6 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89027152
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2004 Buick Rainier Control Module Part Number: 19244901
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module
- Replaces: 19148772, 19301629, 88935759, 88982301
- Item Weight: 1.90 Pounds
- Item Dimensions: 7.8 x 6.3 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244901
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2004 Buick Rainier Control Module Part Number: 19149021
Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Replaces: 89040384
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.5 x 6.2 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19149021
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Rainier Submodels:
- CXL, CXL Plus | 8 Cyl 5.3 L GAS

2004 Buick Rainier ABS Control Module

With a comprehensive array of OEM 2004 Buick Rainier ABS Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Rainier ABS Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick Rainier ABS Control Module Parts and Q&A

Q: How to replace the ABS Control Module on 2004 Buick Rainier?
A: Vehicle elevation is necessary to disconnect both electrical connectors located on the side of the ABS Control Module. A long flat-bladed screwdriver should be used to activate the lock tab present on the ABS Control Module's electrical connector which is found at the back. The installation of T 25-TORX bit requires clean TORX screw heads; if 25-TORX-3 screws show damage or cannot be removed then both ABS Control Module and BPMV need replacement. Loosen the four mounting screws with the T 25-TORX bit while applying light pressure but avoiding ABS Control Module or BPMV distortion before pulling away the ABS Control Module from the BPMV. Upon installation avoid repeated usage of old screws and always use fresh screws with new ABS Control Module equipment and skip the application of RTV or any sealant when assembling the ABS Control Module gasket along with mating surfaces. The ABS Control Module needs to be positioned onto the BPMV before torquing the four new T-25 TORX screws to 5 Nm (39 inch lbs.) through an X-pattern configuration. Connect the electrical wire connectors on both sides of the ABS Control Module while also attaching the connector at the back of the ABS Control Module before lowering the vehicle. Terminate the procedure by executing the Tire Size Calibration function through the Scan Tool.