ChevyParts
My Garage
My Account
Cart
OEM 2004 Buick Rainier Brake Calipers
Caliper- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Brake Calipers found
2004 Buick Rainier Caliper Part Number: 88966985
Product Specifications- Other Name: Caliper, Front Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 12497783
- Item Weight: 5.20 Pounds
- Item Dimensions: 5.2 x 14.3 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88966985
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Buick Rainier Caliper Part Number: 89027178
Product Specifications- Other Name: Caliper Assembly, Rear Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 88935778
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.3 x 6.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89027178
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Buick Rainier Caliper Part Number: 89027177
Product Specifications- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Rear
- Replaces: 88935777
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.2 x 6.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89027177
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Buick Rainier Caliper Part Number: 88966986
Product Specifications- Other Name: Caliper, Front Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 12497784
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.1 x 14.1 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88966986
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Buick Rainier Overhaul Kit Part Number: 88964425
Product Specifications- Other Name: Caliper Kit, Front Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 12497787
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.2 x 3.1 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88964425
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Buick Rainier Brake Calipers
With a comprehensive array of OEM 2004 Buick Rainier Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Rainier Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Buick Rainier Brake Calipers Parts and Q&A
- Q: What Tools Are Needed for a Front Brake Calipers Overhaul on 2004 Buick Rainier?A: For brake caliper front repair you need the j 8092 driver handle and j 43385 boot seal installer tools. First remove all brake fluid from the caliper then pad its internal space with clean cloth. Use care when dealing with compressed air and the Piston as putting fingers in front of it could lead to serious harm. Apply low air pressure when removing the Piston from the socket to protect the system. Rephrase: handle both pistons and boots with care when you pull them out from caliper bores. Carefully extract Piston seals using a tool type other than metal before removing the bleeder valve cap and valve from the caliper unit. Clean all parts including the bleeder valve using denatured alcohol then dry them with filtered air pressure. When the metal parts of the caliper or pistons show signs of wear like scraped grooves or corrosion, replace both components due to these defects. Place the crocus cloth on light caliper bore corrosion to smooth it out but replace the caliper if the corrosion cannot be taken away. Apply fresh brake fluid to new Piston seals plus caliper bores and pistons before installing the seals without twisting them. Apply the boot seals onto the pistons and position them into their respective caliper bores. Position the bleeder valve into the caliper before tightening its screws to 12 nm (110 inch lbs). Then place the bleeder valve cover on top. Install the caliper housing boots by inserting both the j 8092 driver handle and j 43385 boot seal installer at the same time.
Related 2004 Buick Rainier Parts
2004 Buick Rainier ABS Sensor
2004 Buick Rainier Brake Backing Plate
2004 Buick Rainier Brake Bleeder Screw
2004 Buick Rainier Brake Caliper Bolt
2004 Buick Rainier Brake Caliper Repair Kit
2004 Buick Rainier Brake Disc
2004 Buick Rainier Brake Dust Shields
2004 Buick Rainier Brake Line
2004 Buick Rainier Hydraulic Hose
2004 Buick Rainier Parking Brake Shoe
2004 Buick Rainier Wheel Hub Bolt
2004 Buick Rainier Wheel Speed Sensor