How to replace the Mass Air Flow Sensor on 2004 Buick Regal?

Start sensor replacement by removing the fuel injector sight shield. To access the maf sensor you must first disconnect its electrical connector then remove all sensor screws. After removing the maf sensor from its location you can begin the installation process. Mount the maf sensor exactly where it belongs while strictly following service precautions recommendations regarding fastener installation. Tighten the maf sensor screws to 3 n.m (27 lb in) after installation. Reinstall the fuel injector sight shield after you reconnect the maf sensor electrical connector and tighten the maf sensor screws.

OEM 2004 Buick Regal Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mass Air Flow Sensor found

View related parts
2004 Buick Regal Mass Air Flow Sensor
Part Number: 19112543
$72.15 MSRP: $126.48
You Save: $54.33 (43%)
Product Specifications
- Other Name: Sensor Assembly, Mass Airflow (Remanufacture); Manifold Sensor; Air Mass Sensor; Sensor, Computer Control Sensors
- Replaces: 88961007
- Item Weight: 0.50 Pounds
- Item Dimensions: 7.9 x 4.8 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19112543
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Regal Submodels:
- GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS

2004 Buick Regal Mass Air Flow Sensor

With a comprehensive array of OEM 2004 Buick Regal Mass Air Flow Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Regal Mass Air Flow Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick Regal Parts Questions & Experts Answers

Q: How to replace the Mass Air Flow Sensor on 2004 Buick Regal?
A: Start sensor replacement by removing the fuel injector sight shield. To access the maf sensor you must first disconnect its electrical connector then remove all sensor screws. After removing the maf sensor from its location you can begin the installation process. Mount the maf sensor exactly where it belongs while strictly following service precautions recommendations regarding fastener installation. Tighten the maf sensor screws to 3 n.m (27 lb in) after installation. Reinstall the fuel injector sight shield after you reconnect the maf sensor electrical connector and tighten the maf sensor screws.

Related 2004 Buick Regal Parts

Alternate Year Models

2003 Buick Regal Mass Air Flow Sensor