How to replace the shock absorber on 2004 Buick Regal?

To replace the strut assembly, start by removing the strut-to-body mount nuts and then lift and support the vehicle. Then, take out the tire and wheel assembly, and the stabilizer shaft link from the strut. Take off the bolt from the brake hose bracket and strut assembly and scribe the strut to the knuckle, such that the knuckle is retained after pulling out the strut-to-knuckle bolts in order to prevent damage of the Ball Joint or the wheel drive shaft. In that case, pull out the strut from the vehicle. For install, carefully install the strut into place, and install the strut to knuckle bolts tighten to 120 nm (89 ft. Lbs.). Now, take the bolt and install it to the brake hose bracket to the strut assembly by tightening to 27 nm (20 ft. Lbs.) with the stabilizer shaft link attached to strut. Replace the tire and the wheel along with strut to body mount nuts tightening them to 45 nm (33 ft.lbs). Lastly, lower the vehicle and align the rear wheel.

OEM 2004 Buick Regal Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Shock Absorbers found

View related parts
2004 Buick Regal Strut
Part Number: 88965467
$118.69 MSRP: $212.92
You Save: $94.23 (45%)
Product Specifications
- Other Name: Strut Assembly, Front Suspension; Complete Strut and Shock Absorber Kit.; Strut, Front And Rear Suspension
- Position: Front
- Replaces: 22064733, 22064793, 22064745, 22064754, 22064750, 22064755, 22400002, 22064717, 22064784, 22064716, 22064774, 22064707
- Item Weight: 12.70 Pounds
- Item Dimensions: 24.3 x 9.6 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88965467
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2004 Buick Regal Strut
Part Number: 88965469
Product Specifications
- Other Name: Strut Assembly, Rear Suspension; Complete Strut Kit; Shock Absorber.; Strut, Front And Rear Suspension
- Position: Rear
- Replaces: 22064710, 22400003, 22064747, 15846384, 22064752, 22064751, 22064736, 15846385, 22064753
- Item Weight: 14.80 Pounds
- Item Dimensions: 9.3 x 8.3 x 25.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88965469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS

2004 Buick Regal Shock Absorber

With a comprehensive array of OEM 2004 Buick Regal Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Regal Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick Regal Shock Absorber Parts Questions & Experts Answers

Q: How to replace the shock absorber on 2004 Buick Regal?
A: To replace the strut assembly, start by removing the strut-to-body mount nuts and then lift and support the vehicle. Then, take out the tire and wheel assembly, and the stabilizer shaft link from the strut. Take off the bolt from the brake hose bracket and strut assembly and scribe the strut to the knuckle, such that the knuckle is retained after pulling out the strut-to-knuckle bolts in order to prevent damage of the Ball Joint or the wheel drive shaft. In that case, pull out the strut from the vehicle. For install, carefully install the strut into place, and install the strut to knuckle bolts tighten to 120 nm (89 ft. Lbs.). Now, take the bolt and install it to the brake hose bracket to the strut assembly by tightening to 27 nm (20 ft. Lbs.) with the stabilizer shaft link attached to strut. Replace the tire and the wheel along with strut to body mount nuts tightening them to 45 nm (33 ft.lbs). Lastly, lower the vehicle and align the rear wheel.