How to replace the front shock absorber on Buick Regal?

Begin the strut assembly replacement process by taking off the upper nuts of the struts first. A frame-contact vehicle lift should be used instead of a suspension-contact lift to perform the lifting process. After supporting the vehicle with stands follow by tire and wheel removal. Start by making a mark on the knuckle before removing the lower bolts and nuts from the strut so you can take out the strut. Install the strut first before performing any additional work according to the Fastener Notice in Service Precautions. After that, install both upper strut nuts, applying a torque of 33 Nm (24 ft. lbs.). The installation of strut lower bolts and nuts requires attention to their prevalent torque attribute allowing reuse under certain conditions of clean fasteners with rust-free counterpieces that reach 3 Nm (27 inch lbs.) torque vs. their counterparts before completion. otherwise, replace the fastener. Disc the strut to line up with the knuckle mark then torque the lower nuts to 122 Nm (90 ft. lbs.). Install the tire with the wheel and then lower the vehicle while performing front wheel alignment.

What Tools Are Required to Service and Repair Front Coil Springs and Shock Absorber on Buick Regal?

To service and repair the suspension strut, the given list of tools is necessary: fixture (J 3289-20), strut compressor (J 34013-B), damper rod clamp (J 34013-20), lower alignment rod (J 34013-197), strut rod nut socket (J42991), strut lower adapter (J Start by removing the strut from the vehicle. Install the strut in the Strut Compressor (J 34013-B) using the strut lower adapter (J 34013-971) and strut compressor upper adapter (J-34013-972) with the holding fixture (J 3289-20 Compress the spring a little by rotating the compressor forcing screw. Use a 45 TORX(R) socket to retain the strut shaft and the remove the strut mount nut with the strut rod nut socket (J 42991) (4). Attach the alignment rod (J 34013-197) to both direct the strut shaft out of the upper mount and loosen up the compressor screw as you guide the strut shaft out. For assembly, make sure strut mount faces the correct way, install the strut using the strut lower adapter, strut compressor upper adapter, and strut compressor into the strut compressor (J 34013-20). Place the spring, attach with the upper locking pin, and follow the strut shaft with the alignment rod (J 34013-197). Tighten the compressor screw clockwise until strut shaft threads become visible; attach the washer and nut before removing the strut compressor (J 34013-20) unit. Torque the strut mount nut to 85 nm (63 ft. Lbs.) with the strut rod nut socket (J 42991) while holding the strut shaft with a 45 torx(R) socket and pull off the strut from the compressor and re-install it into the vehicle.

OEM Buick Regal Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

32 Shock Absorbers found

View related parts
Buick Regal Strut Part Number: 13310729
$252.47 MSRP: $494.31
You Save: $241.84 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Front and Rear Suspension; Complete Suspension Strut and Shock Absorber Assembly Kit.
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Buick Regal | CXL | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Buick Regal Shock, Rear Upper Passenger Side Part Number: 22950392
$221.78 MSRP: $410.33
You Save: $188.55 (46%)
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Suspension Strut and Shock Assembly Kit; Complete Strut.; Absorber, Front And Rear Suspension
- Position: Rear Upper Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Shock Part Number: 20944661
$49.25 MSRP: $87.94
You Save: $38.69 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber; Suspension Strut and Shock Assembly Kit; Complete Strut
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2012 Buick Regal | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Shock Absorber Part Number: 88945170
$43.58 MSRP: $77.83
You Save: $34.25 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Rear Shock; Shock
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Shock Absorber, Passenger Side Part Number: 13319750
$224.57 MSRP: $421.72
You Save: $197.15 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Suspension Strut Assembly Kit; Strut Shock Kit; Complete Strut; Shock
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2012 Buick Regal | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Shock, Rear Upper Driver Side Part Number: 22950391
$221.78 MSRP: $410.33
You Save: $188.55 (46%)
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Suspension Strut and Shock Assembly Kit; Complete Strut.; Absorber, Front And Rear Suspension
- Position: Rear Upper Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Shock Part Number: 20982300
$49.69 MSRP: $88.74
You Save: $39.05 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber; Suspension Strut and Shock Assembly Kit; Complete Strut Set.; Strut
- Position: Rear
- Replaces: 20901062
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013 Buick Regal | Base, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Shock Absorber, Rear Part Number: 22065228
$51.66 MSRP: $96.40
You Save: $44.74 (47%)
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Rear Shock; Suspension Strut Assembly Kit; Complete Strut; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 22046427, 22065220, 12322209, 22046430, 22047545, 22047246, 22046480
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Strut, Driver Side Part Number: 13319741
Product Specifications
- Other Name: Strut, Front and Rear Suspension; Complete Strut and Shock Absorber Assembly Kit.
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Buick Regal | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Shock Absorber Part Number: 88945324
$57.13 MSRP: $102.02
You Save: $44.89 (44%)
Product Specifications
- Other Name: Absorber Assembly, Front Shock; Shock; Absorber, Front And Rear Suspension; Absorber, Rear Shock
- Position: Front
- Replaces: 22064064, 22065206, 12322213, 22046479, 22046439, 22064442, 22047540, 22046802, 22046431
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Shock Absorber, Driver Side Part Number: 13319749
Product Specifications
- Other Name: Absorber; Suspension Strut and Shock Assembly Kit; Complete Strut; Shock
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2012 Buick Regal | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Strut, Rear Part Number: 22064554
Product Specifications
- Other Name: Strut Assembly, Rear Suspension; Suspension Strut Assembly Kit; Complete Strut; Shock Absorber; Strut, Front And Rear Suspension
- Position: Rear
- Replaces: 22064553
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Shock Absorber, Rear Upper Passenger Side Part Number: 84545219
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock Assembly; Absorber, Front And Rear Suspension
- Position: Rear Upper Passenger Side
- Replaces: 23173567
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Shock Absorber, Rear Upper Driver Side Part Number: 84545218
$92.33 MSRP: $151.35
You Save: $59.02 (39%)
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock Assembly; Absorber, Front And Rear Suspension
- Position: Rear Upper Driver Side
- Replaces: 23173566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Strut Part Number: 88965469
Product Specifications
- Other Name: Strut Assembly, Rear Suspension; Complete Strut Kit; Shock Absorber.; Strut, Front And Rear Suspension
- Position: Rear
- Replaces: 22064710, 22400003, 22064747, 15846384, 22064752, 22064751, 22064736, 15846385, 22064753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Strut, Rear Part Number: 22064558
Product Specifications
- Other Name: Strut Assembly, Rear Suspension; Shock Absorber; Strut, Front And Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Strut, Driver Side Part Number: 13330740
Product Specifications
- Other Name: Strut, Front and Rear Suspension; Complete Strut and Shock Absorber Assembly Kit.
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Buick Regal | CXL | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Buick Regal Strut Cartridge, Front Part Number: 22074850
Product Specifications
- Other Name: Cartridge, Front Suspension Strut; Suspension Strut Assembly Kit; Complete Strut; Shock Absorber; Strut Cylinder; Shock Insert; Cartridge, Front And Rear Suspension
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Shock Absorber, Passenger Side Part Number: 22744713
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Suspension Strut Assembly Kit; Strut Shock Kit; Complete Strut; Shock
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Buick Regal | Base, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Shock Absorber, Rear Upper Driver Side Part Number: 84226150
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock Assembly; Absorber, Front And Rear Suspension
- Position: Rear Upper Driver Side
- Replaces: 22961775
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)

| Page 1 of 2 |Next >

1-20 of 32 Results

Buick Regal Shock Absorber

Want to cut long-term maintenance and repair costs? Choose OEM Shock Absorber. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Regal parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Regal Shock Absorber includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Shock Absorber which is fitted in Buick Regal vehicles is instrumental in suspension system that is primarily used to reduce cases of bouncing which are unnecessary while enhancing the quality of the ride. Through the hydraulic conversion of kinetic energy to heat, the Shock Absorber manages to reduce shock impulses thus improving handling and comfort when on different terrains. Buick Regal over the years has incorporated different types of Shock Absorbers being operating either on twin-tube or on mono-tube. Twin-tube shocks are pretty popular and are quite simple in construction, and can be made gas charged to enhance their resilience. On the other hand, mono-tube shocks are the better solutions to the heat problems and have the advantages that fit in all types of installations. Methods such as the Position Sensitive Damping (PSD) and magnetorheological dampers enhance and fine tune the Buick Regal's suspension characteristics and displays the enhancements of the car's suspension system.

Buick Regal Shock Absorber Parts and Q&A

Strut
88965467
Q: How to replace the front shock absorber on Buick Regal?
A:
Begin the strut assembly replacement process by taking off the upper nuts of the struts first. A frame-contact vehicle lift should be used instead of a suspension-contact lift to perform the lifting process. After supporting the vehicle with stands follow by tire and wheel removal. Start by making a mark on the knuckle before removing the lower bolts and nuts from the strut so you can take out the strut. Install the strut first before performing any additional work according to the Fastener Notice in Service Precautions. After that, install both upper strut nuts, applying a torque of 33 Nm (24 ft. lbs.). The installation of strut lower bolts and nuts requires attention to their prevalent torque attribute allowing reuse under certain conditions of clean fasteners with rust-free counterpieces that reach 3 Nm (27 inch lbs.) torque vs. their counterparts before completion. otherwise, replace the fastener. Disc the strut to line up with the knuckle mark then torque the lower nuts to 122 Nm (90 ft. lbs.). Install the tire with the wheel and then lower the vehicle while performing front wheel alignment.
Strut
88965469
Q: What Tools Are Required to Service and Repair Front Coil Springs and Shock Absorber on Buick Regal?
A:
To service and repair the suspension strut, the given list of tools is necessary: fixture (J 3289-20), strut compressor (J 34013-B), damper rod clamp (J 34013-20), lower alignment rod (J 34013-197), strut rod nut socket (J42991), strut lower adapter (J Start by removing the strut from the vehicle. Install the strut in the Strut Compressor (J 34013-B) using the strut lower adapter (J 34013-971) and strut compressor upper adapter (J-34013-972) with the holding fixture (J 3289-20 Compress the spring a little by rotating the compressor forcing screw. Use a 45 TORX(R) socket to retain the strut shaft and the remove the strut mount nut with the strut rod nut socket (J 42991) (4). Attach the alignment rod (J 34013-197) to both direct the strut shaft out of the upper mount and loosen up the compressor screw as you guide the strut shaft out. For assembly, make sure strut mount faces the correct way, install the strut using the strut lower adapter, strut compressor upper adapter, and strut compressor into the strut compressor (J 34013-20). Place the spring, attach with the upper locking pin, and follow the strut shaft with the alignment rod (J 34013-197). Tighten the compressor screw clockwise until strut shaft threads become visible; attach the washer and nut before removing the strut compressor (J 34013-20) unit. Torque the strut mount nut to 85 nm (63 ft. Lbs.) with the strut rod nut socket (J 42991) while holding the strut shaft with a 45 torx(R) socket and pull off the strut from the compressor and re-install it into the vehicle.