How to replace the Brake Light Switch on 2004 Buick Rendezvous?

Start by taking off the left side instrument panel insulator, and afterwards disconnect the electrical connectors. After that, take the stop lamp switch off the brake pedal bracket by turning it to the left about 1/4 turn and pulling it back. Put the stop lamp switch into the holes and push it all the way toward the brake pedal, then give the switch a quarter turn clockwise to secure it. When that's done, attach the electrical connectors again and slide the left side instrument panel insulator back in place. Adjust the stop lamp switch if you have to.

OEM 2004 Buick Rendezvous Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2004 Buick Rendezvous Stoplamp Switch
Part Number: 10413153
Product Specifications
- Other Name: Switch, Stop Lamp Switch; Brake Light Switch; Switch; Switch, Transmission Converter
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.4 x 1.7 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10413153
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2004 Buick Rendezvous Brake Light Switch

With a comprehensive array of OEM 2004 Buick Rendezvous Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Rendezvous Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick Rendezvous Parts Questions & Experts Answers

Q: How to replace the Brake Light Switch on 2004 Buick Rendezvous?
A: Start by taking off the left side instrument panel insulator, and afterwards disconnect the electrical connectors. After that, take the stop lamp switch off the brake pedal bracket by turning it to the left about 1/4 turn and pulling it back. Put the stop lamp switch into the holes and push it all the way toward the brake pedal, then give the switch a quarter turn clockwise to secure it. When that's done, attach the electrical connectors again and slide the left side instrument panel insulator back in place. Adjust the stop lamp switch if you have to.