Make sure this part fits

GM 10413153
Stoplamp Switch

2001-2007 GM

Customer Questions & Expert Answers (8)
GM 10413153 Stoplamp Switch
  • Part Description
    Switch, Stop Lamp Switch; Brake Light Switch
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10413153
    Part DescriptionSwitch, Stop Lamp Switch; Brake Light Switch
    Other NamesSwitch; Switch, Transmission Converter
    Item Dimensions4.4 x 1.7 x 1.3 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU10413153
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 10413153 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10413153 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Brake Light Switch for Cruise Control on Buick Rendezvous? Posted by Customer
    A:
    The Cruise Control release switch replacement process begins by taking out the insulator from the left side of the instrument panel. Turn the cruise control release switch counter to the limit of travel (about 60 degrees) before removing it from the retainer. First disconnect the electrical connector which operates the cruise control release switch. After connection of the electrical connector with the index notch positioned at the 10 o'clock mark install the switch into its retainer by moving it until its plunger reaches full depression into the barrel without touching or engaging the brake pedal. Turn the switch to the right until it encounters its stopping point then the electrical connector index notch should point to 12 o'clock. Perform a check on the cruise control system for proper operation after which you should reinstall the left side instrument panel insulator.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the process for installing the new stop lamp switch for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Insert the stop lamp switch into the slotted grooves until it is fully depressed against the brake pedal, then turn the switch clockwise approximately 1/4 turn to secure it in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    Q:
    What is the first step in the installation process for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Connect the electrical connector, ensuring the index notch is at the 10 o'clock position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    Q:
    What is the first step to replace the Cruise Control release switch for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Remove the left side instrument panel insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    Q:
    What is the installation process for the stop lamp switch for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Place the stop lamp switch into the slotted grooves until it is fully depressed against the brake pedal, then turn the switch clockwise approximately 1/4 turn to secure it in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    Q:
    What should be done after removing the instrument panel insulator for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Disconnect the electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    Q:
    What should be done after installing the stop lamp switch for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Reconnect the electrical connectors and reinstall the left side instrument panel insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10413153, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10413153 Stoplamp Switch. It is sometimes referred to as GM Brake Light Switch. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10413153 Stoplamp Switch. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Buick parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery