How to replace the Brake Light Switch on 2006 Buick Rendezvous?

The left panel insulator must come off before disconnecting the electrical connections to start swapping out the stop lamp switch. To detach the stop lamp switch turn it counter-clockwise 1/4-rotation then draw it back from the brake pedal bracket. To install position the stop lamp switch into the notch and let it rest against the brake pedal before tightening it one-quarter turn clockwise. Reconnect the electrical components before placing the left side instrument panel insulator back in its position. Rephrase the stop lamp switch position when needed.

OEM 2006 Buick Rendezvous Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2006 Buick Rendezvous Stoplamp Switch
Part Number: 10413153
Product Specifications
- Other Name: Switch, Stop Lamp Switch; Brake Light Switch; Switch; Switch, Transmission Converter
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.4 x 1.7 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10413153
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2006 Buick Rendezvous Brake Light Switch

With a comprehensive array of OEM 2006 Buick Rendezvous Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Rendezvous Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Rendezvous Parts Questions & Experts Answers

Q: How to replace the Brake Light Switch on 2006 Buick Rendezvous?
A: The left panel insulator must come off before disconnecting the electrical connections to start swapping out the stop lamp switch. To detach the stop lamp switch turn it counter-clockwise 1/4-rotation then draw it back from the brake pedal bracket. To install position the stop lamp switch into the notch and let it rest against the brake pedal before tightening it one-quarter turn clockwise. Reconnect the electrical components before placing the left side instrument panel insulator back in its position. Rephrase the stop lamp switch position when needed.