OEM 2007 Buick Rendezvous Brake Light Switch

2007 Buick Rendezvous Parts Questions & Experts Answers

• Q: How to Replace a Brake Light Switch for Cruise Control on 2007 Buick Rendezvous?

  A: Beginning the replacement of the cruise release switch requires removal of the left side instrument panel insulator. To remove the switch from its retainer begin by turning the purchase control release counter clockwise up to 60 degrees travel. First disconnect the electrical connector which belongs to the cruise control release switch. The installation requires mapping the index notch to the 10 o'clock point before you attach electrical wires to the switch. Put the switch in its retainer but keep away from the brake pedal. Apply the retainer switch with plunger depression until complete barrel penetration and proceed to turn the switch clockwise at 60 degrees to face the 12 o'clock electrical connector index mark. Check that the cruise control functions correctly afterwards when installing the left side instrument panel insulator.