How to replace the MAP Sensor on 2007 Buick Rendezvous?

Starting MAP Sensor replacement requires the removal of the Intake Manifold cover. First disconnect the fuel injector harness electric connector from the manifold absolute pressure (MAP) sensor. Following bolt/stud removal the MAP Sensor and its bracket need to be removed along with any remaining MAP Sensor port seal in the Intake Manifold. Push the MAP Sensor onto the Intake Manifold by following the fastener notice. Place the MAP Sensor bracket with its bolt/stud before bolting it to 10 n.m (89 lb in). After restoring the fuel injector harness electrical connector to the MAP Sensor return and reattach the Intake Manifold cover.

OEM 2007 Buick Rendezvous MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2007 Buick Rendezvous M.A.P. Sensor
Part Number: 19418807
$76.01 MSRP: $147.51
You Save: $71.50 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS

2007 Buick Rendezvous MAP Sensor

With a comprehensive array of OEM 2007 Buick Rendezvous MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rendezvous MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rendezvous Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2007 Buick Rendezvous?
A: Starting MAP Sensor replacement requires the removal of the Intake Manifold cover. First disconnect the fuel injector harness electric connector from the manifold absolute pressure (MAP) sensor. Following bolt/stud removal the MAP Sensor and its bracket need to be removed along with any remaining MAP Sensor port seal in the Intake Manifold. Push the MAP Sensor onto the Intake Manifold by following the fastener notice. Place the MAP Sensor bracket with its bolt/stud before bolting it to 10 n.m (89 lb in). After restoring the fuel injector harness electrical connector to the MAP Sensor return and reattach the Intake Manifold cover.