How to replace the rear wheel bearing and hub for RPO FE1 and FE3 on 2004 Cadillac DeVille?

The vehicle needs to go up on stands before starting work to replace the rear Wheel Bearing and hub for vehicles with fe1 and fe3 rpo. Pull off the abs sensor wire and unfasten Wheel Bearing and hub retainer bolts to release the Wheel Bearing, hub, and brake shield assembly. Clean the lower Control Arm surface and its matching hole before putting in the new Wheel Bearing assembly. Position both the Wheel Bearing and hub unit and brake shield onto the lower Control Arm according to the fastener notice from service precautions. Apply bolts to hold both Wheel Bearing and hub in place with 68 nm (50 ft. Lbs.) torque setting. You need to install the brake rotor before you connect the abs sensor wire, put back the wheel and tire and lower the vehicle.

OEM 2004 Cadillac DeVille Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Bearings found

View related parts
2004 Cadillac DeVille Hub Assembly, Front
Part Number: 84641365
$217.28 MSRP: $425.44
You Save: $208.16 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Front Hub & Bearing; Front Wheel Hub Kit; Rear Wheel Hub
- Position: Front
- Replaced by: 19433930
- Item Weight: 10.20 Pounds
- Condition: New
- SKU: 84641365
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2004 Cadillac DeVille Hub Assembly, Rear
Part Number: 7470555
Product Specifications
- Other Name: Hub, Rear Wheel (W/Wheel Speed Sensor); Wheel Bearing & Hub Assembly; Axle Bearing.; Rear Hub & Bearing Assembly; Hub & Bearing; Hub & Bearing Assembly; Rotor Hub & Bearing; Hub; Hub, Rear Wheel
- Position: Rear
- Item Weight: 8.90 Pounds
- Item Dimensions: 7.2 x 6.8 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7470555
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS

2004 Cadillac DeVille Wheel Bearing

With a comprehensive array of OEM 2004 Cadillac DeVille Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Cadillac DeVille Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Cadillac DeVille Parts Questions & Experts Answers

Q: How to replace the rear wheel bearing and hub for RPO FE1 and FE3 on 2004 Cadillac DeVille?
A: The vehicle needs to go up on stands before starting work to replace the rear Wheel Bearing and hub for vehicles with fe1 and fe3 rpo. Pull off the abs sensor wire and unfasten Wheel Bearing and hub retainer bolts to release the Wheel Bearing, hub, and brake shield assembly. Clean the lower Control Arm surface and its matching hole before putting in the new Wheel Bearing assembly. Position both the Wheel Bearing and hub unit and brake shield onto the lower Control Arm according to the fastener notice from service precautions. Apply bolts to hold both Wheel Bearing and hub in place with 68 nm (50 ft. Lbs.) torque setting. You need to install the brake rotor before you connect the abs sensor wire, put back the wheel and tire and lower the vehicle.