OEM 2004 Cadillac Seville Fuse Box

2004 Cadillac Seville Parts Questions & Experts Answers

• Q: How to replace the underhood fuse box on 2004 Cadillac Seville?

  A: Owners should start repairs of an underhood electrical center or junction block by disconnecting the negative Battery Cable from the battery followed by removing fasteners from the positive Battery Cable and the positive cable itself. Clean off the four retaining clips before lifting the electrical fuse block from its base. By turning it upside down you will gain access to disconnect all electrical connectors using the three connector fasteners. The installer requires a motor vehicle to remove fasteners (1,3) from the fuse block base then bring out the base from the vehicle. Follow these installation steps: set the fuse block base onto the body then fasten it with fasteners (1,3) while torquing all base nuts to 6 n.m (53 lb in) and the remaining base bolt to 9 n.m (80 lb in). Attach all electrical connectors to the fuse block while positioning it bottom-up into the base then start tightening the fasteners to a torque of 6.6 n.m. Put the front fuse block into the base assembly while confirming that all clips securely hold the fuse block in place. Begin by reconnecting the positive Battery Cable together with its fastener to the front fuse block while tightening the fastener to 15 n.m (11 lb ft). The process finishes with reconnecting the negative Battery Cable.