OEM 2004 Cadillac SRX Fuel Rail

2004 Cadillac SRX Parts Questions & Experts Answers

• Q: How to replace the fuel injectors and fuel rail on 2004 Cadillac SRX?

  A: As a first step replace fuel injectors along with Fuel Rail by relieving fuel system pressure then removing both upper and lower intake manifolds. You should first separate the fuel feed pipe retaining clip while disconnecting the pipe from the injector rail. Through compressed air blast off debris from the Fuel Injector manifold entry area before extracting Fuel Rail bolts by protecting the spray tips and electrical connector terminals from damage. The Fuel Rail needs support during removal while you use caps to seal the fittings and seal plugs to prevent contamination entry. The procedure starts by disconnecting the Fuel Injector electrical connector after which you can remove the Fuel Injector retainer clip along with the Fuel Injector itself but save the old Fuel Injector seals for disposal. You should begin installation by putting new Fuel Injector seals onto their designated location before inserting the Fuel Injector accompanied by a retainer clip. Engage the lock of the Fuel Injector electrical connector before reinstalling the Fuel Rail along with its fuel injectors while tightening Fuel Rail bolts to 10 n.m (89 lb in). At the last step connect the fuel feed pipe to the Fuel Rail while adding the fuel pipe retaining clip then reinstall the upper Intake Manifold.