OEM 2004 Cadillac XLR Door Striker

2004 Cadillac XLR Parts Questions & Experts Answers

• Q: How to replace the front door striker on 2004 Cadillac XLR?

  A: The first steps to swap out the front Door Striker involve lifting the door window and panel removal together with the large water deflector to reveal the rear door compartment. First find the position of the striker on the door edge before removing the striker fasteners inside the door and extracting the striker itself. Installing the striker requires a placement of the latching pin directly against the door latch while inserting the fasteners tightly. Connect the striker to marked positions before securing the fasteners at 24 n.m (18 lb ft). To install the striker when previous marks are hidden your assistant should keep the outer door surface in line with the quarter panel during your fastener tightening from inside the vehicle. Tighten the fasteners to 24 n.m (18 lb ft). Close up the operations by reattaching the large water deflector, door panel and double-check the door latch functionality through manual and electrical door releases while ensuring proper panel alignment.