How to replace the MAP Sensor on 2004 Chevrolet Classic?

In order to replace the manifold absolute pressure (MAP) sensor first remove the air cleaner outlet resonator, as well as the accelerator cable bracket. Then disconnect the manifold absolute pressure (MAP) sensor harness connector and uninstall the MAP Sensor from the Intake Manifold making sure to check for any damages in the seal. In case the seal suffers damage, the MAP Sensor requires replacement. For installation use the new MAP Sensor seal supplied with the new MAP Sensor install the new MAP Sensor into the Intake Manifold and connect the MAP Sensor harness connector. Lastly, install the accelerator cable bracket and the air cleaner outlet resonator.

OEM 2004 Chevrolet Classic MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2004 Chevrolet Classic M.A.P. Sensor
Part Number: 19418807
$76.01 MSRP: $147.51
You Save: $71.50 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Chevrolet Classic Submodels:
- Base, LS | 4 Cyl 2.2 L GAS

2004 Chevrolet Classic MAP Sensor

With a comprehensive array of OEM 2004 Chevrolet Classic MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Classic MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Classic Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2004 Chevrolet Classic?
A: In order to replace the manifold absolute pressure (MAP) sensor first remove the air cleaner outlet resonator, as well as the accelerator cable bracket. Then disconnect the manifold absolute pressure (MAP) sensor harness connector and uninstall the MAP Sensor from the Intake Manifold making sure to check for any damages in the seal. In case the seal suffers damage, the MAP Sensor requires replacement. For installation use the new MAP Sensor seal supplied with the new MAP Sensor install the new MAP Sensor into the Intake Manifold and connect the MAP Sensor harness connector. Lastly, install the accelerator cable bracket and the air cleaner outlet resonator.