How to replace the MAP Sensor on 2005 Chevrolet Classic?

The manifold absolute pressure (MAP) sensor replacement process starts with removing both the air cleaner outlet resonator and the accelerator cable bracket. Begin by disconnecting the manifold absolute pressure (MAP) sensor harness connector after removing the MAP Sensor from the Intake Manifold. Inspect the seal for any damage at this time. The MAP Sensor needs replacement after detecting damaged seal conditions. Put the new MAP Sensor into the Intake Manifold using the MAP Sensor seal that comes in the sensor kit while connecting the sensor harness then reinstall the accelerator cable bracket and end with the outlet resonator installation.

OEM 2005 Chevrolet Classic MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2005 Chevrolet Classic M.A.P. Sensor Part Number: 19418807
$76.01 MSRP: $129.40
You Save: $53.39 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2005 Chevrolet Classic Submodels:
- Base, LS | 4 Cyl 2.2 L GAS

2005 Chevrolet Classic MAP Sensor

With a comprehensive array of OEM 2005 Chevrolet Classic MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Classic MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Classic MAP Sensor Parts and Q&A

Q: How to replace the MAP Sensor on 2005 Chevrolet Classic?
A: The manifold absolute pressure (MAP) sensor replacement process starts with removing both the air cleaner outlet resonator and the accelerator cable bracket. Begin by disconnecting the manifold absolute pressure (MAP) sensor harness connector after removing the MAP Sensor from the Intake Manifold. Inspect the seal for any damage at this time. The MAP Sensor needs replacement after detecting damaged seal conditions. Put the new MAP Sensor into the Intake Manifold using the MAP Sensor seal that comes in the sensor kit while connecting the sensor harness then reinstall the accelerator cable bracket and end with the outlet resonator installation.