How to replace the Knock Sensor (KS) on 2005 Chevrolet Classic?

To replace the Knock Sensor (KS), you have to perform the following steps: remove the Starter, and disconnect the Knock Sensor (KS) harness connector. Then remove the ks retaining bolt and take out the ks. For installation the amidst, ks threaded surfaces be clean before knock sensors installation. Tighten the Knock Sensor retaining bolt to 25 n.m (18 lb ft), and then connect the Knock Sensor harness connector and reinstall the starting.

OEM 2005 Chevrolet Classic Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2005 Chevrolet Classic Knock Sensor Part Number: 12567711
$28.40 MSRP: $53.34
You Save: $24.94 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Replaced by: 19434674
- Replaces: 12589373, 24577244, 12615500
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.2 x 7.0 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567711
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Classic Submodels:
- Base, LS | 4 Cyl 2.2 L GAS

2005 Chevrolet Classic Knock Sensor

With a comprehensive array of OEM 2005 Chevrolet Classic Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Classic Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Classic Knock Sensor Parts and Q&A

Q: How to replace the Knock Sensor (KS) on 2005 Chevrolet Classic?
A: To replace the Knock Sensor (KS), you have to perform the following steps: remove the Starter, and disconnect the Knock Sensor (KS) harness connector. Then remove the ks retaining bolt and take out the ks. For installation the amidst, ks threaded surfaces be clean before knock sensors installation. Tighten the Knock Sensor retaining bolt to 25 n.m (18 lb ft), and then connect the Knock Sensor harness connector and reinstall the starting.