How to replace the ignition coil housing on 2005 Chevrolet Classic?

Start by taking out the accelerator and cruise control cables from the bracket, and afterwards take off the bracket. Remove the ignition control module and the Ignition Coil housing retaining bolts after that, and take out the Ignition Coil housing from the camshaft cover. To put it back in place, set the Ignition Coil housing on the camshaft cover and tighten the retaining bolts to 10 n.m (89 lb in). Then, put the icm back in place and attach the bracket for the accelerator and cruise control cables, tighten its bolts to 10 n.m (89 lb in). After that, connect the accelerator and cruise control cables to the bracket.

OEM 2005 Chevrolet Classic Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2005 Chevrolet Classic Ignition Coil
Part Number: 12587426
Product Specifications
- Other Name: Coil Assembly-Ignition; Ignition Control Module; Ignition Module; Coil; Coil, Ignition Coil
- Item Weight: 2.70 Pounds
- Item Dimensions: 18.6 x 7.3 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12587426
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Classic Submodels:
- Base, LS | 4 Cyl 2.2 L GAS

2005 Chevrolet Classic Ignition Coil

With a comprehensive array of OEM 2005 Chevrolet Classic Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Classic Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Classic Ignition Coil Parts Questions & Experts Answers

Q: How to replace the ignition coil housing on 2005 Chevrolet Classic?
A: Start by taking out the accelerator and cruise control cables from the bracket, and afterwards take off the bracket. Remove the ignition control module and the Ignition Coil housing retaining bolts after that, and take out the Ignition Coil housing from the camshaft cover. To put it back in place, set the Ignition Coil housing on the camshaft cover and tighten the retaining bolts to 10 n.m (89 lb in). Then, put the icm back in place and attach the bracket for the accelerator and cruise control cables, tighten its bolts to 10 n.m (89 lb in). After that, connect the accelerator and cruise control cables to the bracket.

Related 2005 Chevrolet Classic Parts

Alternate Year Models

2004 Chevrolet Classic Ignition Coil