OEM 2004 Chevrolet Corvette CV Joint

CV Joint Axle
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 CV Joints found

  • 2004 Chevy Corvette CV Joint - 88952505
    2004 Chevy Corvette CV Joint Diagram - 88952505
    View related parts
    Product Specifications
    • Other Name: Joint Kit, Rear Axle Universal Joint; CV Joint; Inner Joint
    • Position: Rear Inner
    • Item Weight: 6.90 Pounds
    • Item Dimensions: 10.0 x 9.7 x 4.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 88952505
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2004 Chevrolet Corvette Submodels:
    • 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
  • 2004 Chevy Corvette CV Joint - 88952504
    2004 Chevy Corvette CV Joint Diagram - 88952504
    View related parts
    Product Specifications
    • Other Name: Joint Kit, Rear Axle Universal Joint; CV Joint; Outer Joint
    • Position: Rear Outer
    • Replaces: 12532153
    • Item Weight: 7.90 Pounds
    • Item Dimensions: 7.1 x 6.4 x 6.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 88952504
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2004 Chevrolet Corvette Submodels:
    • 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2004 Chevrolet Corvette CV Joint

With a comprehensive array of OEM 2004 Chevrolet Corvette CV Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Corvette CV Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Corvette CV Joint Parts Questions & Experts Answers

  • Q: How to replace the outer CV Joint and seal of the wheel drive shaft on 2004 Chevrolet Corvette?
    A: Before performing outer joint and seal replacement work on the wheel drive shaft begin by removing the drive shaft from the vehicle. Place the wheel drive shaft with a shop towel-wrapped Axle Shaft into a horizontal position inside a bench vise. The axle seal crimp tool (J46588) helps retrieve the big seal retaining clamp from the CV Joint seal; you can discard the small retaining clamp with a side cutter or acceptable tool. Remove the joint outer race seal and clean the joint inner race with a cloth. Your assistant should then aid you in removing the outer joint from the Axle Shaft. Player can mildy hit a wooden block using a hammer to push down the Axle Shaft retaining clip until the outer joint releases. Proceed by extracting the retaining ring from the Axle Shaft and the seal from the shaft. Subsequently dry the components using air then cleanse them extensively with solvent before reassembly. After proper alignment place the cage and inner race correctly then insert the inner race into the cage before adding the balls to the installation components. Install six balls followed by the addition of an even amount of service kit grease to cover 60 percent of the outer joint's space. Start installation with the new small seal retaining clamp on the Axle Shaft before adding the seal and completing with the retention ring. Use the inner race splines to lock into Axle Shaft splines then compress the retaining ring until you can drive the outer joint onto the shaft with a wooden block and hammer. Crimp the small seal retaining clamp with drive axle seal clamp pliers (J42572) while using the axle seal crimp tool (J46588) to position the large seal retaining clamp correctly before inspecting the smooth operation of bearings.

Related 2004 Chevrolet Corvette Parts