How to replace the front door interior door handle on 2004 Chevrolet Corvette?

The front door interior handle replacement process begins by detaching the bezel from the door handle before removing the door trim panel together with the water deflector. The screw behind the inside handle manual locking lever serves to fix the handle to the door segment. Use your fingers to squeeze the handle rear mounting tabs until the rear part unclips from the door surface and push the handle downward through its forward mounting slots. Detach the lock rods from the anti-rattle retainer by fully opening the handle while removing them. To mount the handle push it open to maximum extent before installing the upper and lower lock rods underneath it. Place the handle front section into the locking points on the door before setting the back portion of the handle to snap into place. The handle receives a screw which requires a tightness setting of 5 N.m (44 lb in). To proceed attach the lock rods to the anti-rattle retainer while positioning them at the black mark on the rod anti-rattle sleeve before placing back the water deflector and door trim panel and inside handle bezel which should be fitted around the handle before pushing firmly to engage the bezel locking tabs to the door.

OEM 2004 Chevrolet Corvette Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Door Handles found

View related parts
2004 Chevrolet Corvette Handle, Outside, Black; Blue; White, Driver Side
Part Number: 10439373
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Driver Side
- Replaces: 10271324, 10404960, 10271322, 10271320, 10271332, 10439545, 10271328
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.8 x 4.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10439373
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Handle, Outside, Passenger Side
Part Number: 10439381
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 5.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10439381
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Handle, Inside, Passenger Side
Part Number: 10406534
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.2 x 3.8 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10406534
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Handle, Inside, Driver Side
Part Number: 10406533
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.2 x 3.8 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10406533
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Pull Handle, Black, Driver Side
Part Number: 22640133
Product Specifications
- Other Name: Handle Assembly-Front & Rear Side Door Pull *Black; Handle, Front Door Trim
- Position: Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.4 x 2.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22640133
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Pull Handle, Black, Passenger Side
Part Number: 22640132
Product Specifications
- Other Name: Handle Assembly-Front & Rear Side Door Pull *Black; Handle, Front Door Trim
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.4 x 1.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22640132
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2004 Chevrolet Corvette Door Handle

With a comprehensive array of OEM 2004 Chevrolet Corvette Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Corvette Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Corvette Door Handle Parts Questions & Experts Answers

Q: How to replace the front door interior door handle on 2004 Chevrolet Corvette?
A: The front door interior handle replacement process begins by detaching the bezel from the door handle before removing the door trim panel together with the water deflector. The screw behind the inside handle manual locking lever serves to fix the handle to the door segment. Use your fingers to squeeze the handle rear mounting tabs until the rear part unclips from the door surface and push the handle downward through its forward mounting slots. Detach the lock rods from the anti-rattle retainer by fully opening the handle while removing them. To mount the handle push it open to maximum extent before installing the upper and lower lock rods underneath it. Place the handle front section into the locking points on the door before setting the back portion of the handle to snap into place. The handle receives a screw which requires a tightness setting of 5 N.m (44 lb in). To proceed attach the lock rods to the anti-rattle retainer while positioning them at the black mark on the rod anti-rattle sleeve before placing back the water deflector and door trim panel and inside handle bezel which should be fitted around the handle before pushing firmly to engage the bezel locking tabs to the door.