How to replace the front interior door handle on 2003 Chevrolet Corvette?

Replacing the front door interior handle requires first removing the bezel from the door handle after which you should remove the door trim panel and the water deflector. The screw behind the manual locking lever of the inside handle serves to connect the handle to the door so it needs removal. Press the rear mounting tabs on the handle to separate it from the door before drawing the handle toward the front door slot. Begin by opening the handle to its fullest position then pull off the lock rods from the anti-rattle retainer. Start the installation by enlarging the handle until it reaches maximum position before connecting the upper and lower lock rods. The mounting slots in the door should receive the forward handle end which then triggers the rear handle piece into engagement with the door. Fasten the handle with the screw and tighten it to 5 N.m (44 lb in). Insert the lock rods into the anti-rattle retainer at the black mark visible on rod anti-rattle sleeves before replacing the door trim panel, water deflector and then place the inside handle bezel around the interior handle before pushing it firmly to activate the bezel locking tabs on the door.

OEM 2003 Chevrolet Corvette Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Door Handles found

View related parts
2003 Chevrolet Corvette Handle, Outside, Black; Blue; White, Driver Side Part Number: 10439373
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Driver Side
- Replaces: 10271324, 10404960, 10271322, 10271320, 10271332, 10439545, 10271328
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.8 x 4.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10439373
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Handle, Outside, Passenger Side Part Number: 10439381
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 5.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10439381
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Handle, Inside, Passenger Side Part Number: 10406534
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.2 x 3.8 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10406534
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Handle, Inside, Driver Side Part Number: 10406533
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.2 x 3.8 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10406533
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Pull Handle, Black, Driver Side Part Number: 22640133
Product Specifications
- Other Name: Handle Assembly-Front & Rear Side Door Pull *Black; Handle, Front Door Trim
- Position: Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.4 x 2.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22640133
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Pull Handle, Black, Passenger Side Part Number: 22640132
Product Specifications
- Other Name: Handle Assembly-Front & Rear Side Door Pull *Black; Handle, Front Door Trim
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.4 x 1.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22640132
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2003 Chevrolet Corvette Door Handle

With a comprehensive array of OEM 2003 Chevrolet Corvette Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Corvette Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Corvette Door Handle Parts and Q&A

Q: How to replace the front interior door handle on 2003 Chevrolet Corvette?
A: Replacing the front door interior handle requires first removing the bezel from the door handle after which you should remove the door trim panel and the water deflector. The screw behind the manual locking lever of the inside handle serves to connect the handle to the door so it needs removal. Press the rear mounting tabs on the handle to separate it from the door before drawing the handle toward the front door slot. Begin by opening the handle to its fullest position then pull off the lock rods from the anti-rattle retainer. Start the installation by enlarging the handle until it reaches maximum position before connecting the upper and lower lock rods. The mounting slots in the door should receive the forward handle end which then triggers the rear handle piece into engagement with the door. Fasten the handle with the screw and tighten it to 5 N.m (44 lb in). Insert the lock rods into the anti-rattle retainer at the black mark visible on rod anti-rattle sleeves before replacing the door trim panel, water deflector and then place the inside handle bezel around the interior handle before pushing it firmly to activate the bezel locking tabs on the door.