Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2004 Chevrolet Malibu Air Bag Sensor

Air Bag Impact Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Bag Sensor found

  • 2004 Chevy Malibu Air Bag Sensor - 10367112
    2004 Chevy Malibu Air Bag Sensor Diagram - 10367112
    View related parts

    2004 Chevrolet Malibu Impact Sensor Part Number: 10367112

    Product Specifications
    • Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Front Sensor
    • Position: Front
    • Replaces: 22664115, 21996529
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 3.3 x 2.2 x 1.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 10367112
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2004 Chevrolet Malibu Submodels:
    • Base, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2004 Chevrolet Malibu Air Bag Sensor

With a comprehensive array of OEM 2004 Chevrolet Malibu Air Bag Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Malibu Air Bag Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Malibu Air Bag Sensor Parts and Q&A

  • Q: How to replace the Air Bag Sensor for Side Impact on 2004 Chevrolet Malibu?
    A: Before replacing the Inflatable Restraint Side Impact Sensor users must disable the SIR system. You can reach the side impact sensor by removing the front door trim panel and carefully peeling the rear section of the water deflector from the door. Begin by releasing the side impact sensor retaining screws while removing the sensor's electrical connector from its connection point on the impact sensor. Clean the surface where the side impact sensor will mount by removing all dirt, grease, and impurities that are present on it following the sensor's removal from the door. Set the side impact sensor flat against the door before hooking up the electrical connector to the sensor. Spaces left-hand screws on each side impact sensor before tightening them with 8 N.m (71 lb in) torque. Board the water deflector to complete the door before adding the door trim panel and restarting the SIR system.

Related 2004 Chevrolet Malibu Parts

Alternate Year Models

+
2005 Chevrolet Malibu Air Bag Sensor