OEM 2004 Chevrolet Malibu Antenna Cable

2004 Chevrolet Malibu Antenna Cable Parts Questions & Experts Answers

• Q: How to Replace an Antenna Cable on 2004 Chevrolet Malibu?

  A: Before starting Antenna Cable replacement open the instrument panel fully and remove the radio Antenna Cable from its connection to the radio extension cable. Reach behind the lower rear section of the wheelhouse panel to remove both the Antenna Cable and its grommet assembly from the cowl opening. Insert and remove the Antenna mast after feeding the radio Antenna Cable end through the cowl opening. To remove the radio Antenna Cable assembly first remove its retaining screws then insert Antenna Cable and grommet assembly through fender opening before extracting the complete assembly off the vehicle. After rebuilding the Antenna Cable assembly insert it into the vehicle spacekeeping the grommet and Antenna Cable inside the fender opening. Tighten the retaining screws of the radio Antenna Cable assembly to 2.8 n.m (25 lb in) then close the hood and install the Antenna mast. From behind the wheelhouse panel guide the radio Antenna Cable assembly end through the cowl opening and then attach its Antenna Cable grommet assembly to the cowl opening. Secure the wheelhouse panel after mounting the radio Antenna Cable to the radio extension cable and sealing the i/p compartment.