How to replace the MAP Sensor on 2004 Chevrolet Malibu?

Turn off the ignition before starting replacement of the manifold absolute pressure (MAP) sensor. First disconnect the Throttle Body and the air cleaner outlet resonator. First disconnect the MAP Sensor harness connector but also remove the MAP Sensor along with its port seal if this remains in the Intake Manifold. First position the MAP Sensor with port seal inside the Intake Manifold and then secure the MAP Sensor harness connector by checking for the click then pull to verify proper connector seating. Reinstall the Throttle Body followed by the air cleaner outlet resonator.

OEM 2004 Chevrolet Malibu MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2004 Chevrolet Malibu M.A.P. Sensor
Part Number: 19418807
$76.01 MSRP: $147.51
You Save: $71.50 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2004 Chevrolet Malibu MAP Sensor

With a comprehensive array of OEM 2004 Chevrolet Malibu MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Malibu MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2004 Chevrolet Malibu?
A: Turn off the ignition before starting replacement of the manifold absolute pressure (MAP) sensor. First disconnect the Throttle Body and the air cleaner outlet resonator. First disconnect the MAP Sensor harness connector but also remove the MAP Sensor along with its port seal if this remains in the Intake Manifold. First position the MAP Sensor with port seal inside the Intake Manifold and then secure the MAP Sensor harness connector by checking for the click then pull to verify proper connector seating. Reinstall the Throttle Body followed by the air cleaner outlet resonator.