How to replace the emblem/nameplate on the rear compartment lid on 2004 Chevrolet Monte Carlo?

Start replacing the Monte Carlo emblem/nameplate by placing tape on the lid surface as installation guides before damage prevention during removal. Heat the emblem/nameplate with the J25070 Heat Gun for 30 seconds while moving the tool in circles. Use a plastic flat tool to gently pull off the emblem/nameplate from the panel face. To prepare the surface use a molding adhesive remover disk from 3M P/N 07502 or an equivalent for body panels or use a lint-free cloth dipped in VMP naptha or isopropyl alcohol water solution for plastic panels. Begin by cleaning and drying the area where the Monte Carlo and Chevy emblem/nameplates will be installed. Use tape to mark their precise positions before starting the process. The J 25070 Heat Gun at between 80 and 105°F (27 and 41°C) should warm the mounting surface when needed. During application, maintain the emblem/nameplate at a temperature range between 85 and 90°F (29 and 32°C). Set the parts by finger-touching the peel-off on top while placing the emblem/nameplate onto the designated marks and pressing it hard enough for an even bond. Take off the protective tape from the mounting area to complete the installation.

OEM 2004 Chevrolet Monte Carlo Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Emblems found

View related parts
2004 Chevrolet Monte Carlo Emblem, Rear Part Number: 10409460
$49.42 MSRP: $70.71
You Save: $21.29 (31%)
ADD TO CART
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.4 x 2.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10409460
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Emblem, Front Part Number: 10289678
Product Specifications
- Other Name: Emblem Assembly-Front Bumper Fascia; Emblem, Bumper/Fascia
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10289678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Nameplate, Black, Rear Part Number: 10402605
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 10.2 x 1.6 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10402605
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Emblem, Rear Part Number: 10289881
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.4 x 2.1 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10289881
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
2004 Chevrolet Monte Carlo Nameplate, Silver Part Number: 88980542
Product Specifications
- Other Name: Emblem, Rear Quarter Panel
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.6 x 6.2 x 34.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88980542
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LT, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Nameplate, Black Part Number: 88980626
Product Specifications
- Other Name: Emblem, Rear Quarter Panel
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 27.0 x 6.7 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88980626
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LT, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Nameplate, Silver, Rear Part Number: 10412434
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 10.2 x 1.5 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10412434
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Nameplate, White, Rear Part Number: 10427198
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 9.8 x 1.6 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10427198
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Nameplate, Gray, Rear Part Number: 10338691
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 10.3 x 1.5 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10338691
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LT, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2004 Chevrolet Monte Carlo Emblem

With a comprehensive array of OEM 2004 Chevrolet Monte Carlo Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Monte Carlo Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Monte Carlo Emblem Parts and Q&A

Q: How to replace the emblem/nameplate on the rear compartment lid on 2004 Chevrolet Monte Carlo?
A: Start replacing the Monte Carlo emblem/nameplate by placing tape on the lid surface as installation guides before damage prevention during removal. Heat the emblem/nameplate with the J25070 Heat Gun for 30 seconds while moving the tool in circles. Use a plastic flat tool to gently pull off the emblem/nameplate from the panel face. To prepare the surface use a molding adhesive remover disk from 3M P/N 07502 or an equivalent for body panels or use a lint-free cloth dipped in VMP naptha or isopropyl alcohol water solution for plastic panels. Begin by cleaning and drying the area where the Monte Carlo and Chevy emblem/nameplates will be installed. Use tape to mark their precise positions before starting the process. The J 25070 Heat Gun at between 80 and 105°F (27 and 41°C) should warm the mounting surface when needed. During application, maintain the emblem/nameplate at a temperature range between 85 and 90°F (29 and 32°C). Set the parts by finger-touching the peel-off on top while placing the emblem/nameplate onto the designated marks and pressing it hard enough for an even bond. Take off the protective tape from the mounting area to complete the installation.