OEM 2004 Chevrolet Monte Carlo Oil Filter

2004 Chevrolet Monte Carlo Parts Questions & Experts Answers

• Q: How to replace the engine oil and oil filter on 2004 Chevrolet Monte Carlo?

  A: You must start by raising the vehicle along with supporting it so you can place the drain pan below the engine oil Drain Plug. Start by cleaning and checking the engine Oil Pan Drain Plug before either repairing it or purchasing a new one. Create a clean surface for inspection on the Oil Pan before testing it for replacement or repair. After removing the Oil Filter you need to check the engine block's sealing area for any damage before conducting repairs or filter replacements. To install the new Oil Filter you should apply clean oil on the gasket and use a torque wrench at 3/4 to 1 full turn when the gasket reaches the mounting surface. Fasten the engine Oil Pan Drain Plug at 25 nm (18 ft. Lbs.) torque. Place the oil drain pan away after lowering the vehicle then proceed with filling the engine using fresh engine oil. After starting the engine check for oil leaks. Let the oil drain back into the Oil Pan during a few minutes of engine shutdown. Safely pull the oil level indicator from the tube before cleaning its end with a paper towel. Then reinstall the indicator so the handle reaches the top of the tube. Check the oil level while maintaining the oil level indicator's tip in a downward position. Check the oil level by adding or draining engine oil when required.