How to replace the front brake calipers on 2004 Chevrolet Silverado 3500?

Begin brake caliper replacement by checking the master cylinder reservoir fluid level. The fluid level needs no change when it stands between maximum and minimum points but you need to lower it to midway position if it exceeds this range. Lift the vehicle while using supports before taking away tire and wheel from the chassis. By inserting a large c-clamp above the caliper housing on the back of the outboard pad the brake caliper pistons can be pushed in until the pistons are fully retracted. Once fully compressed remove the c-clamp. After cleaning the brake hose end install a rubber cap or plug on the brake pipe fitting to block fluid loss and contamination before uninstalling the brake hose caliper bolt from the brake caliper. Discard the two stuck brake hose gaskets made of copper before taking the brake hose off its mount on the caliper. Remove the 2 brake caliper mounting bolts after you've secured the brake system from depressions occurring with the tire Brake Calipers/rotors or brake drums out of position. Extract the brake caliper off its mounting bracket. Secure the brake caliper with mounting brass by torqueing the 2 bolts to 108 nm (80 ft. Lbs.). More simply the brake hose fitting by removing its rubber cap or plug before you install two new brake hose gaskets made of copper to fasten the brake hose to the caliper bolt while tightening this assembly to 40 nm (30 ft. Lbs.). The repair process includes bleeding the hydraulic system followed by tire-wheel reinstallation before lowering the vehicle and correctly filling its master cylinder reservoir with new fluid.

OEM 2004 Chevrolet Silverado 3500 Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2004 Chevrolet Silverado 3500 Caliper, Front Driver Side
Part Number: 84394384
$107.66 MSRP: $208.96
You Save: $101.30 (49%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Replaced by: 87859910
- Item Weight: 15.50 Pounds
- Item Dimensions: 8.4 x 5.3 x 14.4 inches
- Condition: New
- SKU: 84394384
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Silverado 3500 Submodels:
- Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2004 Chevrolet Silverado 3500 Caliper, Passenger Side
Part Number: 84803425
$135.01 MSRP: $251.95
You Save: $116.94 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket); Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Replaced by: 87859911
- Condition: New
- SKU: 84803425
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Chevrolet Silverado 3500 Submodels:
- Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2004 Chevrolet Silverado 3500 Caliper, Front Passenger Side
Part Number: 84394392
$185.79 MSRP: $343.75
You Save: $157.96 (46%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Replaces: 25846389, 18046220
- Item Weight: 15.70 Pounds
- Item Dimensions: 14.8 x 8.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84394392
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Silverado 3500 Submodels:
- Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2004 Chevrolet Silverado 3500 Caliper, Driver Side
Part Number: 25848329
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Replaces: 18046142, 18044316
- Item Weight: 15.30 Pounds
- Item Dimensions: 9.2 x 5.1 x 14.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25848329
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Silverado 3500 Submodels:
- Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2004 Chevrolet Silverado 3500 Caliper, Passenger Side
Part Number: 25848330
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Replaces: 18046143, 18044317
- Item Weight: 16.50 Pounds
- Item Dimensions: 9.5 x 5.2 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25848330
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Silverado 3500 Submodels:
- Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2004 Chevrolet Silverado 3500 Caliper, Front Driver Side
Part Number: 84394391
$190.26 MSRP: $341.26
You Save: $151.00 (45%)
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Replaces: 18046219, 25846388
- Item Weight: 15.90 Pounds
- Item Dimensions: 14.8 x 8.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84394391
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Silverado 3500 Submodels:
- Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS

2004 Chevrolet Silverado 3500 Brake Calipers

With a comprehensive array of OEM 2004 Chevrolet Silverado 3500 Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Silverado 3500 Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Silverado 3500 Brake Calipers Parts Questions & Experts Answers

Q: How to replace the front brake calipers on 2004 Chevrolet Silverado 3500?
A: Begin brake caliper replacement by checking the master cylinder reservoir fluid level. The fluid level needs no change when it stands between maximum and minimum points but you need to lower it to midway position if it exceeds this range. Lift the vehicle while using supports before taking away tire and wheel from the chassis. By inserting a large c-clamp above the caliper housing on the back of the outboard pad the brake caliper pistons can be pushed in until the pistons are fully retracted. Once fully compressed remove the c-clamp. After cleaning the brake hose end install a rubber cap or plug on the brake pipe fitting to block fluid loss and contamination before uninstalling the brake hose caliper bolt from the brake caliper. Discard the two stuck brake hose gaskets made of copper before taking the brake hose off its mount on the caliper. Remove the 2 brake caliper mounting bolts after you've secured the brake system from depressions occurring with the tire Brake Calipers/rotors or brake drums out of position. Extract the brake caliper off its mounting bracket. Secure the brake caliper with mounting brass by torqueing the 2 bolts to 108 nm (80 ft. Lbs.). More simply the brake hose fitting by removing its rubber cap or plug before you install two new brake hose gaskets made of copper to fasten the brake hose to the caliper bolt while tightening this assembly to 40 nm (30 ft. Lbs.). The repair process includes bleeding the hydraulic system followed by tire-wheel reinstallation before lowering the vehicle and correctly filling its master cylinder reservoir with new fluid.