Make sure this part fits

GM 25848329
Caliper, Driver Side

2001-2010 GM

Customer Questions & Expert Answers (7)
GM 25848329 Caliper, Driver Side
GM 25848329 Caliper, Driver Side
  • Part Description
    Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
  • Position
    Driver Side
  • Replaces
    18046142, 18044316
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007-2010 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2001-2006 GMC Sierra 3500Base, SL, SLE, SLT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 GMC Sierra 3500 ClassicSL, SLE, SLT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007-2010 GMC Sierra 3500 HDSLE, SLT, WT8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25848329 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25848329 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should you do if the fluid level is higher than midway for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Reduce it to the midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What are the final steps after installing the brake caliper for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Bleed the hydraulic brake system, install the tire and wheel assembly, and fill the master cylinder reservoir to the proper level with clean brake fluid if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after inspecting the fluid level for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after lubricating the caliper bores and pistons for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Install the boot over the end of the piston with the fold facing the brake caliper housing piston bore opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the installation process for the new components for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Attach the anti-rattle clips to the caliper bracket, install the brake pads, and then the caliper to the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be inspected after removing the caliper bleed screw cap and screw for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Inspect the caliper bore and piston seal groove for excessive scoring or corrosion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper, Driver Side 25848329 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25848329 Caliper, Driver Side is available in the market under the name GM Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25848329 Caliper, Driver Side fits certain Chevrolet Silverado 3500, Silverado 3500 Classic, Silverado 3500 HD models, as well as GMC Sierra 3500, Sierra 3500 Classic, Sierra 3500 HD models.
The original GM component designated by manufacturer part number 25848329 maintains top performance when functioning as the Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper unit at its Driver Side. The component 25848329 is constructed from durable material and its dimensions span 9.2 x 5.1 x 14.6 inches while weighing 15.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 25848329 has available replacement options 18046142, 18044316. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.