How to replace the front Door Latch Assembly on 2004 Chevrolet SSR?

The process to replace the front door latch begins by first removing door trim panel and front water deflector. To begin remove the inside Door Handle from the door before disconnecting the clip that holds the outside Door Handle rod to the front Door Lock. Extract the outside lock rod both from the door latch and inner lower lock rod. Disassemble the front door latch by removing its screws followed by disconnecting its electric wires. The latch leaves the access hole of the front door inner panel for removal. Place the latch through the front door inner panel entry and join electrical wires to the lock unit for installation. Secure the latch screws within the front Door Lock while tightening their torque to 10 n.m (89 lb in). First disconnect the clip that holds the outside handle rod at the front Door Lock and then install the outside rod onto the door latch followed by attaching the inner lower lock rod. The Door Lock system operation needs inspection before installing the front door water deflector and door trim panel.

OEM 2004 Chevrolet SSR Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Door Latch Assemblys found

View related parts
2004 Chevrolet SSR Lock Actuator, Driver Side
Part Number: 15115931
Product Specifications
- Other Name: Lock, Door Lock; Door Lock Actuator Motor; Lock; Door Lock
- Position: Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.6 x 10.2 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15115931
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2004 Chevrolet SSR Lock, Passenger Side
Part Number: 15175758
Product Specifications
- Other Name: Latch, End Gate Lock; Trunk Latch; Door Lock; Latch
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15175758
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2004 Chevrolet SSR Lock Actuator, Passenger Side
Part Number: 15115932
Product Specifications
- Other Name: Lock, Door Lock; Door Lock Actuator Motor; Lock; Door Lock
- Position: Passenger Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.6 x 10.2 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15115932
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2004 Chevrolet SSR Lock, Driver Side
Part Number: 15175759
Product Specifications
- Other Name: Latch, End Gate Lock; Trunk Latch; Door Lock; Latch
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15175759
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2004 Chevrolet SSR Door Latch Assembly

With a comprehensive array of OEM 2004 Chevrolet SSR Door Latch Assembly, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet SSR Door Latch Assembly are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet SSR Parts Questions & Experts Answers

Q: How to replace the front Door Latch Assembly on 2004 Chevrolet SSR?
A: The process to replace the front door latch begins by first removing door trim panel and front water deflector. To begin remove the inside Door Handle from the door before disconnecting the clip that holds the outside Door Handle rod to the front Door Lock. Extract the outside lock rod both from the door latch and inner lower lock rod. Disassemble the front door latch by removing its screws followed by disconnecting its electric wires. The latch leaves the access hole of the front door inner panel for removal. Place the latch through the front door inner panel entry and join electrical wires to the lock unit for installation. Secure the latch screws within the front Door Lock while tightening their torque to 10 n.m (89 lb in). First disconnect the clip that holds the outside handle rod at the front Door Lock and then install the outside rod onto the door latch followed by attaching the inner lower lock rod. The Door Lock system operation needs inspection before installing the front door water deflector and door trim panel.