How to replace the Vehicle Speed Sensor (VSS) on 2004 Chevrolet SSR?

Begin by disconnecting both the VSS electrical connector and bolt. Then remove the Vehicle Speed Sensor unit with its O-ring seal. Oil the VSS O-ring seal then position it on the sensor before placing the device into the transmission case. Fasten the bolt by turning it until it reaches 11 Nm (97 inch lbs.) torque value. Use the wire connector to join the vehicle speed sensor with the vehicle. Position the correct amount of transmission fluid before you complete the job.

OEM 2004 Chevrolet SSR Vehicle Speed Sensor

VSS

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vehicle Speed Sensor found

View related parts
2004 Chevrolet SSR Speed Sensor
Part Number: 24225896
$30.84 MSRP: $50.80
You Save: $19.96 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Vehicle Speed; Vehicle Speed Sensor; ABS Sensor; Sensor, Computer Control Sensors; Sensor, Speedometer Drive; Sensor, Speedometer
- Replaces: 10456520, 10456194
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.7 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24225896
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2004 Chevrolet SSR Vehicle Speed Sensor

With a comprehensive array of OEM 2004 Chevrolet SSR Vehicle Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet SSR Vehicle Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet SSR Parts Questions & Experts Answers

Q: How to replace the Vehicle Speed Sensor (VSS) on 2004 Chevrolet SSR?
A: Begin by disconnecting both the VSS electrical connector and bolt. Then remove the Vehicle Speed Sensor unit with its O-ring seal. Oil the VSS O-ring seal then position it on the sensor before placing the device into the transmission case. Fasten the bolt by turning it until it reaches 11 Nm (97 inch lbs.) torque value. Use the wire connector to join the vehicle speed sensor with the vehicle. Position the correct amount of transmission fluid before you complete the job.